Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 03-20-2019, 04:23 AM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default Reed valve

New to this forum. I can?t seem to find replacement reed valves. I have a 2011 EC300.


Reply With Quote


  #2  
Old 03-20-2019, 06:37 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,594
Default

Welcome to the forum.

Do you have the V Force 3 Reed block?
Reply With Quote
  #3  
Old 03-20-2019, 07:33 AM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by Stepsidebowtie View Post
New to this forum. I can?t seem to find replacement reed valves. I have a 2011 EC300.
Welcome to the forum. Where are you located?
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #4  
Old 03-20-2019, 08:55 AM
risk74 risk74 is offline
Senior Member
 
Join Date: Jun 2016
Posts: 240
Default

Moto-Tassanari part #3P682M for replacement petals if V-Force 3.
Reply With Quote
  #5  
Old 03-20-2019, 11:49 AM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

Thanks for the response guys. I?m located in Hawaii. I just picked up the bike on Sunday. There?s a low to mid range gurgling, no hesitation. The best explanation I can give is if a car was running on 7 cylinders instead of 8. There?s no problem at WOT though. I opened up the carb and found 35 pj, 158 mj, and N8RW needle on the second clip. There?s spooge coming out of the muffler too. I ordered a JD jetting kit. I didn?t get to inspect the reed valves yet. It?s a vforce3 valve. Any info would be a big help. Thanks.
Reply With Quote
  #6  
Old 03-20-2019, 01:12 PM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Golly that's a small pilot and tiny mainjet. Never heard of that needle. Put the complete kit in and try it again.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #7  
Old 03-20-2019, 01:59 PM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

That?s what I said. I?m just waiting on my kit to arrive. That?s one disadvantage of living in Hawaii.
Reply With Quote
  #8  
Old 03-20-2019, 05:40 PM
sneaky98gt sneaky98gt is offline
Member
 
Join Date: Dec 2017
Posts: 49
Default

I just bought reeds for the V-Force 3 in my 2011 EC250 from North Tahoe Motorsports on Ebay. Look them up. They've got a kit both with and without the gaskets. I'd highly recommend getting the one with the gaskets, as my gaskets were stuck on and removing them completely destroyed them. The ones on it (I assume stock) were a paper base, while the new ones seem to be a bit more like foam / rubber.

I'm not sure how shipping to Hawaii works, but it was very fast from Nevada to North Carolina. They've got piston and gasket kits, too. (I also ordered those at the same time).
Reply With Quote
  #9  
Old 03-20-2019, 09:20 PM
Stepsidebowtie Stepsidebowtie is offline
Member
 
Join Date: Mar 2019
Location: Hawaii
Posts: 15
Default

Yeah I?ve been searching on eBay. I found one for $50 with free shipping to Hawaii.
Reply With Quote
  #10  
Old 03-21-2019, 03:37 AM
(F5)'s Avatar
(F5) (F5) is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

I recently replaced the reeds in my 07. They were wearing thin on the contact area but wouldn't have failed for some time. Have a look at them before you order.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Reed valve spacer... motopsycho87 Enduro Intake/Carburetion - 2 stroke 6 08-03-2016 07:28 AM
What reed valve in 2000 EC300 Robert127 Enduro Intake/Carburetion - 2 stroke 4 02-16-2016 06:41 AM
reed valve crossover mc 2000 mikevancapel Enduro Engine - 2 stroke 3 01-21-2013 10:06 PM
Vfrorce reed valve? blanc Enduro Intake/Carburetion - 2 stroke 33 06-30-2012 07:12 PM




All times are GMT -5. The time now is 02:32 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org