|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Rear Brake Pedal Height Adjustment
How can I lower the rear brake pedal on my 2018 EC300?
It is presently a little too high for comfort. |
#2
|
||||
|
||||
Adjust the pedal height at the master cylinder push rod.
|
#3
|
||||
|
||||
Roger that, will give that a try. Thanks for responding! Steve
|
#4
|
||||
|
||||
That's only for freeplay isn't it? Same as front brake. No adjusment unlike Brembo.
__________________
'18 Gasgas XC250 Last edited by shawbagga; 09-05-2019 at 09:35 AM. |
#5
|
||||
|
||||
No. That's the height adjuster also.
|
#6
|
||||
|
||||
I was able to successfully lower my brake pedal height by loosening the lock nut near the bottom of the master cylinder plunger threaded rod and then turning the plunger where it emerges from the master cylinder rubber boot.
Easy and worked a treat! Thanks for posting gasgasman! Cheers Steve |
#7
|
|||
|
|||
Get yourself a manual, explains it and with pictures in there for you.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Steering lock/Brake pedal height adjustment | fletchman45 | Enduro Chassis & Body | 14 | 06-04-2013 11:52 AM |
Lowering Rear Brake Pedal Height? | 2whlrcr | Enduro Chassis & Body | 9 | 08-29-2010 06:17 PM |
Rear brake adjustment | Silver | Enduro Chassis & Body | 5 | 06-03-2009 07:50 AM |
Rear brake pedal | HydroDog | Enduro Chassis & Body | 0 | 03-09-2008 10:48 PM |