Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-15-2013, 03:18 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default TMD skid plate

I see TM design works have a nice looking skid plate http://www.tmdesignworks.com/index.p...roducts_id=966

but only listed for 2012 + bikes. Anyone tried it out? would it also fit on earlier models?


__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote


  #2  
Old 08-02-2013, 10:01 AM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

nobody?

(since others are complaining about the forum being quiet i figured this would be a good time to get some answers on the unanswered posts!)
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #3  
Old 08-02-2013, 01:02 PM
Coop's Avatar
Coop Coop is offline
Senior Member
 
Join Date: Mar 2013
Location: Acme, Pa
Posts: 480
Default

Since you were referring to me I'll respond even if I don't have an answer lol. Sounds nice from the description. I have a Hyde on my 2010. I like it but it is a pain in the butt to put back on after you remove it.
__________________
-Mike
2009 Beta Evo 300 4T - 1982 Suzuki PE175
Reply With Quote
  #4  
Old 08-02-2013, 01:44 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

Quote:
Originally Posted by Coop View Post
Since you were referring to me I'll respond even if I don't have an answer lol. Sounds nice from the description. I have a Hyde on my 2010. I like it but it is a pain in the butt to put back on after you remove it.
Haha well just making conversation since I have just received an AXP skid plate so will give a review soon. Looks good in the box and brackets look much more pro AND they have a second drain hole for the crank plug :-)
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #5  
Old 08-02-2013, 11:03 PM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default

We have a TMD in red at the shop, it looks pretty good. Better than the AXP as it has no welds. I just tossed my AXP at 15hrs because it was trashed, hope yours holds up better.
__________________

www.gasserparts.com
Reply With Quote
  #6  
Old 08-02-2013, 11:46 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

Does the tmd fit the 2010's?
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #7  
Old 08-03-2013, 08:51 AM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default

We don't have any older ones here or I would check.
Here's my AXP with 15hrs, note the left side is coming off at the front and the back side is pretty messed up as well.
__________________

www.gasserparts.com
Reply With Quote
  #8  
Old 08-03-2013, 09:34 AM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

is there a good picture of the TMD one? And from your location I going to go out on a limb here... rocky trails?
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
  #9  
Old 08-03-2013, 01:29 PM
swazi_matt swazi_matt is offline
Senior Member
 
Join Date: May 2010
Location: From Swaziland, Now Hamilton New Zealand the “look but don’t touch” enduro heaven
Posts: 2,334
Default

I did think about the weld coming apart but thought the chances were slim of it happening :-/
The Hyde is also lacking in coverage at the left foot peg, this looked better in the pics.
Now just need to get someone to try the tmd on an older GG. But the coverage at the back end seems less than the axp
__________________
2003 txt250 Pro
2013 Ossa 280i
Reply With Quote
  #10  
Old 08-04-2013, 11:21 AM
Appalachian Offroad Appalachian Offroad is offline
Member
 
Join Date: Feb 2012
Posts: 55
Default

I'll try to remember to take a pic of the TMD tomorrow but it won't be on an older bike. Might hold it up to a 13 though. I opted for a Scorpion plate because I was hoping it would hold up better and it seems to have good coverage.
__________________

www.gasserparts.com
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
AXP Skid Plate gg3 Enduro Chassis & Body 2 07-18-2011 01:47 AM
Skid Plate gg3 General Discussions & Announcements 0 07-10-2011 06:32 PM
06 300 skid plate on a 10 Diddel General Discussions & Announcements 1 06-09-2010 04:28 AM
Skid Plate Tom Zelko Enduro Chassis & Body 30 03-04-2008 06:44 AM




All times are GMT -5. The time now is 08:09 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org