|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Part-Out 2010 300 and 2009 200 SOLD
UPDATED 9 18 16
All prices do not include shipping. I think (and hope) that my prices are reasonable. I don't want to make a fortune off this stuff, just a fair deal for both parties......and I want it out of my garage 2009 200 50hrs on the bike. Parting-it-out due to the motor attempting to commit suicide. Send me a PM or Email (preferably with the part you are interested in and your phone # ) and I'll gladly text pics. Texting is simplest for me. Engine minus Stator (top end, bottom end, reeds) AS IS Piston and Cylinder damage-not sure what happened. Besides a lack of low-end the bike ran fine, I happened to find the cracked piston when I decided to measure/adjust squish. Engine was actually running fine, have GoPro video of the last ride.. (09' 200) $400 Pipe OEM. One small dent (09' 200) $100 P3 Pipe Guard 200/250/300 $75 Oversized PV Cover- this is the one machined by the guy on this forum. It is two separate spacers, uses OEM Cap. $40 Sachs Shock. (09' 200) Sprung for 200lb rider weight. Valved for rocks/very soft. 09' 200 $150 Triple Clamps. Top Clamp is the GPR Stabilizer Mount Clamp Includes Collar/Pin $150. (09'200) Triple Clamps OEM (10' 300) $70 Wheels (front and rear) 09 200. $300. One small dent to rear rim. Wheels (front and rear) 10' 300 $300 10' Plastics (not including actual/glass headlight). White. Custom Graphics $50 09' Plastics OEM. $50 Scorpion Rad Guards (09' 200) $75 OEM Radiators. (09 200') $150 Plastic Frame Guards (just above pegs) 10' 300 + 09' 200 $5 each Front Brake complete with lever (09' 200) $150 Aluminum Skid Plate $40 (09' 200) Rear Brake complete with lever (09' 200) $150 Clutch complete, MC, Slave, Lever and Line $100 (10'300) Clutch complete, MC, Slave, Lever and Line $100 (09' 200) OEM Tank with Cap and Petcock. (09' 200) $50 Carb OEM. Jets, Needle, Motion Pro +3" and Throttle included $150 (10' 300) Carb OEM. Jets, Needle, Cable and Throttle included $140 (09' 200) Subframe (metal portion only, no plastic/airbox etc) 10 300 $150 Frame with Title $200 (09' 200) Swingarm- has defect where a bolt that was too long (installed by yours truly) wore into the material. Bearings and Seals are new $50 (10' 300) Airbox $ 20 (10'300) Full Linkage $100 (09' 200) GPR Sub-Mount kit (including collar and post). Stabilizer not included. (10' 300). Also have smaller I.D. Collar. Fits many years $50 TwinAir Air Filters (2) -used but life left in them $5 each OEM Chain Guide $5 (09 200') OEM Bar Mounts $10 Rad/Engine hoses $5 Bucket of Bolts. 75% of the bolts, nuts, fasteners, etc. Basically all the bits left-over after the part-out $40 Rear Brake Lever (09' 200) $40 Kickstand $50 OEM Handguards/Plastic Deflectors (removed at 5hrs) $5 (black, 10' 300) Wiring Harness with Stator $250 (09' 200) Sicass Dual-Sport Lighting Kit. Headlight (bulb) included. LED rear turn signals, LED front hand guard turn signals. $200 New Rear Pads EBC $ 10 ? Front Brake and Clutch Levers (worked on my 09 and 10) $15
__________________
2015 KTM 450 XCW 2014 350 XCF Wife's 2009 200 ec. Loving it 2007 Beta Rev 3 270 2007 KTM 200 XC Wife's Public Lands belong to the Public Last edited by husley; 07-31-2017 at 01:00 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Full Part-Out 2010 300 | husley | Parts | 57 | 02-13-2018 11:15 AM |
2010 Partial Part Out - Seeking interest | Jakobi | Parts | 18 | 03-29-2016 09:15 PM |
2009 gfx on 2010 plastics | Philcom2000 | Enduro Chassis & Body | 0 | 04-20-2011 12:11 PM |