|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Transformation kits for 1997 ec 250
Hi I'm looking at getting a Transformation kit from the www.Motorcrosscenter.com for my 1997 ec250 it's the (Nambotin 2011 kit)
I understand from reading another post on these kits I will need to move the Coil in order for the new tank to fit but I have also been told that I need to make a hole in the frame so the new tank can attach properly, Im getting the 00-11 tank as recommended by the company Has anyone done this modification to the frame? Pictures would be brilliant ! Cheers |
#2
|
||||
|
||||
The 00-02 tanks have a recess for the taller shock mount like your bike has. If you mount one of the newer tanks like lower profile 04 and newer you'll need a new hole to mount it by the steering neck and also trim down the bracing for the shock mount and add more in a different location since the newer tanks don't have the recess.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#3
|
||||
|
||||
Cheers for the reply fella, what do you mean trim down the bracing for the shock mount and add more in a different location, whats the Bracing ?
|
#4
|
||||
|
||||
When you pull the tank you'll know what I mean. GG has a small frame work or brace built on top of the upper shock mount. You'll have to remove that to get the non recessed tank to sit low enough and weld some bracing back on elsewhere to strengthen it back up. Or just get a 00-02 tank with the recess built into the bottom of the tank.
__________________
Noah 2000 EC250 with 2011 transformation kit, KYB SSS forks, MN street title 16' Ski-Doo XS Renegade X 1200 4T 16' Specialized Fatboy trail 02' ZRX 1200r R.I.P. 72' Olds 500ci, Batten Heads, Street/Drag car, former CarCraft magazine centerfold (has-been) 15' TW200 |
#5
|
||||
|
||||
Ok, cool, cheers for explaining
|
#6
|
||||
|
||||
I contacted the Motorcrosscenter asking about instructions to fit the kit and
This is what said To change fuel tank when you will put the modification kit the only thing you have to do is a new hole in the frame (in the front part of the frame). When you would do the modification if you have any problem or any doubt please send me a mail and we will try to help you. Thanks. Mikel. Motocrosscenter That's great news, they must have changed the shape of the fuel tank so now I don't have to move the coil etc! |
#7
|
|||
|
|||
Quote:
I just did this to my wifes 97' so I have first hand knowledge. Here is what you will need to do: Cut/trim shock mount move coil to side of frame trim down coolant mount on top of head Or find a new/used head and cylinder and replace. It's not as easy as the later 1999 bikes and on. The cylinder and head are the biggest obstacles you will have. They are a different shape for that year. The spark plug is tilted sideways and the coolant mount is huge for some reason. http://gasgasrider.org/forum/showthread.php?t=16149 |
#8
|
||||
|
||||
Oops, just ordered the tank ! , that sounds like a nightmare !
Cheers for letting me know, it's a bit out of order giving me advice saying all I would have to do is drill one hole !!! My sub frame is falling apart, one of the reasons I was going for the kit , ok best drop them an e-mail, shame your wife's bike looks sweet , but I'm not doing the work myself, I'm getting the frame/ swing arm powder coated currently and I do like the way my bike looks, just thought it would look nice all updated, I think I will keep the bike as it is, mainly because I haven't got a clue, so paying to have it done is going to cost ????. Thanks for the heads up mate |
#9
|
|||
|
|||
You could have a machinist take a bit off the coolant intake to clear the tank. Anyone you know that can weld, just need a small bead to relocate the coil. My welding skills are fair considering I grew up welding on farm equipment so it didn't have to be pretty.
And a grinder would make short work of the shock mount. |
#10
|
||||
|
||||
I know someone that will do the lot, I'm getting a quote tomorrow, can I still use the original silencer or are the mounts on the sub frame different ?
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2004 to 2011 transformation in 10 hours!! | leeroybrown9 | Enduro Chassis & Body | 4 | 10-15-2013 04:28 PM |
2005 to 2011 transformation questions | jcborden | Enduro Chassis & Body | 20 | 05-23-2013 11:05 AM |
transformation kit help needed | nknudsen | Enduro Chassis & Body | 5 | 03-29-2013 11:16 AM |
2005 to 2011 transformation | whodat | Enduro Chassis & Body | 23 | 03-22-2013 10:30 PM |
Gasgas transformation kit | Crombie | General Discussions & Announcements | 2 | 03-01-2013 04:27 PM |