|
Parts New/Used Components and All Bike Part Outs |
|
Thread Tools | Display Modes |
#11
|
||||
|
||||
I've got a 2012 HOP pipe and silencer on my 2011 gasser. I made 2 flat extensions for the pipe mounts and it fit perfect like Richard (the HOP guy who built the pipe) said it would. He said the silencer wouldn't fit without a lot of work but what I did was cut the forward bracket off the silencer and about an inch off the stinger end of the pipe to get everything to line up. Seems to work great.
|
#12
|
|||
|
|||
Dave, just sent you a PM/email regarding the exhaust items.
Thanks, Dan |
#13
|
||||
|
||||
2011 pipe
the 12 pipe will fit an 11 if you use a longer mounting bracket on top pipe mount,
|
#14
|
||||
|
||||
I have a 2012/2013 HOP pipe & silencer on my 2011 250. I made simple flat extension pieces for the pipe rubber mounting brackets. Very simple and it worked great. The silencer is a different story. I ended up cutting about 1 inch off the stinger end of the expansion chamber so the rear bracket on the silencer would line up with the rear mounting point on the frame. I also had to saw off the front mounting tab on the silencer so it would clear the frame.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
House of Horsepower Silencer | phoenix | Parts | 15 | 04-18-2016 07:20 AM |
House of Horsepower kit has arrived! | CombatYoga | Enduro Engine - 2 stroke | 35 | 01-14-2016 12:07 AM |
House Of Horsepower Silencer | gasser | Parts | 1 | 09-12-2015 12:15 PM |
Shout out to House of Horsepower | freddy701 | General Discussions & Announcements | 0 | 06-26-2014 08:01 AM |