05 EC250 Marzocchi stock shim arrangement ?

[ferguscawley]

Hi all

I have my friend's 05 EC250 front forks apart at the moment. He was complaining of zero damping and constant crashing in the woods.

Anyway, to cut a long story short, I disassembled the forks to find that on both legs, the lower shim stacks had come apart and the shims have fallen out and got 'mashed' up in use. The bike had been re-valved by the previous owner so I reckon the damage was done there.
I want to return his forks to stock so I am looking for the shim arrangement for both compression and rebound on the stock EC250 Marzocchi fork (05).
I have looked for hours online to try to find this and cannot find a definitive answer.

Does anyone know what the shim arrangement should be on this bike ?. (the valves have the 1mm bleed hole, not the 2mm hole as on the 06 zokes).

Any help would be greatly appreciated.

Many thanks

Fergus