Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2007, 07:21 PM
gasIdaho gasIdaho is offline
Senior Member
 
Join Date: Aug 2006
Location: Driggs, Idaho
Posts: 155
Default Float Bowl HELP!

I was taking my float bowl off to re-jet and my float came off with it as well as the pin and the other part(plunger?). This has never happened so I never paid much attention to how the assembly hooked up.

My question is how to re-attach this other part which I'm assuming regulates the gas flow into the carb. Does it just slide over the metal tab on the float assembly?


Reply With Quote


  #2  
Old 07-18-2007, 07:33 PM
eff's Avatar
eff eff is offline
Silver Level Site Supporter
 
Join Date: Jul 2006
Location: RI
Posts: 1,758
Default

Yes. The loop on top of the plunger just slides onto the tab on the float.
Reply With Quote
  #3  
Old 07-18-2007, 09:26 PM
RBD RBD is offline
Site Sponsor
 
Join Date: Jul 2006
Posts: 91
Default

Quote:
Originally Posted by eff View Post
Yes. The loop on top of the plunger just slides onto the tab on the float.
Yes, and with the two little wire ears pointed away from the pivot pin

Ron
Reply With Quote
  #4  
Old 07-18-2007, 09:30 PM
gasIdaho gasIdaho is offline
Senior Member
 
Join Date: Aug 2006
Location: Driggs, Idaho
Posts: 155
Default

Yep. Got her up and running. Classic situation. Good tunes and distilled liquids flowing. Pull off the float bowl, parts fall off and slide down into countershaft and linkage nooks. Good times......
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lodi Cycle Bowl Marathons Rick Western United States 0 12-13-2009 06:13 PM
Float issues JoshP Enduro Intake/Carburetion - 2 stroke 16 05-24-2009 05:50 PM
Float Fix gasser Enduro Intake/Carburetion - 2 stroke 1 03-29-2009 10:32 AM
ec 250 float heights????? twibs Enduro Intake/Carburetion - 2 stroke 22 02-27-2008 01:49 AM
Float height ??? bens25au Enduro Intake/Carburetion - 2 stroke 3 08-01-2007 04:28 AM




All times are GMT -5. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org