GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 11-14-2009, 03:36 PM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default odd ktm/gg 43/48/zoke suspension quandry

SO I have a 625SXC with the 43wp's,, and I have acquired a set of 48wp's from a 03sx that need to be resealed. They are complete, clamps to wheel.. so it could be a drop on.. once rebuilt. I also have a 97 GG that I was looking to put a set of 43's on it.. Have the stock clamps for 43's for that bike,, now it has old school 45zoke conventionals that have the tendency to leak after every ride.. Now if I put the 48's on the sxc I could put the 43s from the sxc on the GG.. but the bigger axle my sumo wheels would not fit on the sxc anymore.. I also have a set of husky 45 zoke inverted forks but need a set of clamps to make them work on either bike.. oh decisions decisions decisions!! I could always put the 48's on the GG? I think the ktm clamp and the GG clamp are the same offset??
What would you do??
Oh the GG is my 97 250ec-2stroker woods bike and I use my sxc for the same trails,, just a bit slower and noisier..


__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote


  #2  
Old 11-15-2009, 07:37 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Steve,

I'd get those Zokes sorted and put on your GG, as long as you can manage the clamp issue and the offset is OK. As far as the 48s vs 43s on the KTM, is it worth it for what you do with the bike? What would you have to do to get the sump wheeles to fit? Aren't those older 48s the ones with the bushing issue, you have to remome one of the three bushings to get them to work decent?
Reply With Quote
  #3  
Old 11-15-2009, 11:43 AM
Cruiser Cruiser is offline
Senior Member
 
Join Date: Jul 2006
Location: Jim Thorpe Pa
Posts: 1,280
Default

I'll have to check on the issues on the 48's.. dont know for sure.. But for the $ I have in them I couldnt turn them down.. Got a full front end, a PDS rear, cdi w/coil and the newer style rear brake complete for $100.. Just have to sell the rear PDS, and the CDI from the SX and I should have some cash to start playing with these..
__________________
Steve
16 Beta 350rr
04 KTM 525 sx/exc gone
03 KTM 625 sxc-rehab unit-did its job and now gone
03 GG 250 ec-gone
97 GG 250 ec Gone
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
50mm zoke rebuild PEB Enduro Suspension 4 08-30-2010 07:24 PM
45mm zoke shim id Ed Ventura Enduro Suspension 1 09-22-2008 05:34 AM
Recommendations on a zoke tuner? stvbird Enduro Suspension 2 02-13-2008 06:40 AM
EC 200 Suspension Gas Huffer General Discussions & Announcements 3 11-13-2007 10:34 AM




All times are GMT -5. The time now is 06:33 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org