|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Gnarly on '11 EC200?
I checked FMF's site and they have the Gnarly pipe listed for model years up to 2005, but nothing newer.
Does anyone know if FMF makes the Gnarly pipe for the late model 200s? And while I'm on the subject, does anyone know for a fact that the pipes are actually shared between the 200s and 250/300s? I ask because the 250/300 pipes are supposedly stamped with a part number, but my 200 pipe has no such stamp - just GG. And there's an article that rover sent me from a while back that details a problem encountered during a test in the UK in which that 200 was mistakenly fitted with a 250 pipe and didn't run quite right. Thanks! |
#2
|
|||
|
|||
I have a 2005 200 gnarly pipe on my bike, it's an 06.
on gofasters website they list the fmf fatty as fitting the 200/250/300, but on fmf's website they say it will only fit the 250/300
__________________
Jack - western PA 2006 KTM 250 sx 2006 EC 200/ 11' style kit--GONE 2004 200 EXC 1997 KDX 220 2004 CRF 250X 1974 CL125 www.youtube.com/allthatstuff35 <---some gasgas videos here |
#3
|
|||
|
|||
fmf does NOT make pipes for the newer 200's. I believe there are some other companies that do, like DEP and probably some other non USA companies.
the GasGas 200 pipe is different than the 250/300 pipe. It has different shape in the beginning. It also has a different part number. I have the following pipes: 2006 250/300 GasGas pipe 2007-10(&11) FMF gnarly 2011 250/300 GasGas pipe 2011 200 GasGas pipe the 2011 GG 200 pipe is shorter in the first 2 sections. The rest appears identical to the 250/300 2011 GG pipe. The different is very small. The fmf Gnarly 250/300 pipe is significantly longer in the small beginning diameter. The 2006 250/300 GG pipe is also longer in the small diameter sections.
__________________
2011 GasGas ec300R 2011 GasGas ec200 Six Days |
#4
|
||||
|
||||
roverhybrids, do you have a part # for the '11 200 pipe from gg?
I was told the part # 2012 is for the 200's and# 3012 for the 250/300's |
#5
|
||||
|
||||
Thanks for the input guys, think I'll look into the DEP pipe. Anyone happen to have a shot of the armored pipe? The DEP site doesn't have one.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P3/Gnarly fit | bkwdc | General Discussions & Announcements | 32 | 11-03-2013 05:11 PM |
Gnarly | Rabbitist | Enduro Engine - 2 stroke | 0 | 12-05-2011 11:18 AM |
Gnarly on a 200 | iancp5 | Enduro Engine - 2 stroke | 4 | 04-30-2009 07:33 AM |
ec200 fmf gnarly | rupecopp | Enduro Engine - 2 stroke | 1 | 10-31-2008 09:24 AM |
FMF Gnarly | 2 strokes 4 life | Enduro Intake/Carburetion - 2 stroke | 23 | 10-02-2008 08:28 PM |