Yz kickstart

[Diggs345]

Ok , before I go out and buy a yz kickstart for my bike , do any of you guys have one you would be willing to sell and ship to the uk priority mail , ill give this ad till Monday before I purchase off ebay .

Thanks all

[AZRickD]

I was going to swap kickers from my 2005 WR450 to my 2011 GG and vis a versa. Are those years compatible?

[Diggs345]

Originally Posted by AZRickD

I was going to swap kickers from my 2005 WR450 to my 2011 GG and vis a versa. Are those years compatible?

Don't know pal , would be good to know though as there seem to be more kickers available for the 4 bangers

[AZRickD]

Desert Gasser just emailed me to say that the 450 4T kickers don't fit. Just the YZ 2T kickers will work.

[Diggs345]

Ok pal , thanks for the reply

[Eric K]

The Yamaha 450 kickstarts don't fit due to bigger diameter splines.

I installed a 2007 YZ250F kickstarter on my 2006 EC300 with a little filing on lower fwd edge to avoid interference with clutch cover.

It is nicer than the YZ250 2T kicker,

[Diggs345]

Originally Posted by Eric K

The Yamaha 450 kickstarts don't fit due to bigger diameter splines.

I installed a 2007 YZ250F kickstarter on my 2006 EC300 with a little filing on lower fwd edge to avoid interference with clutch cover.

It is nicer than the YZ250 2T kicker,

Thanks Eric , that's good to know and there is more chance of picking a used one up over here .

Chris

[magnetnerd]

Originally Posted by Eric K

The Yamaha 450 kickstarts don't fit due to bigger diameter splines.

I installed a 2007 YZ250F kickstarter on my 2006 EC300 with a little filing on lower fwd edge to avoid interference with clutch cover.

It is nicer than the YZ250 2T kicker,

I was watching this thread after having torn my boot to shreds with the stock kicker.

Picked up a 2010 YZ250F kickstarter and it bolted up; no filing necessary on mine (I have an 03 EC250).

Eliminated footpeg bashing and made it significantly easier to start (not that it was difficult before but now it requires little more than a soft push). This thing gets my approval big time!

[Diggs345]

Thanks , that's good to know , I ended up getting another gas gas one as I had an order coming from Spain and they are much cheaper there , ill be getting a Yamaha one though in the near future .

[StuJohnson]

YZ250 are the ones that fit

FYI - EBay is always a great place to find these where bikes have been parted out...

http://www.ebay.com/itm/YZ250F-Kicks...35501c&vxp=mtr