Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 01-29-2023, 10:39 AM
riton63 riton63 is offline
Join Date: Sep 2020
Posts: 3

Hello my 300 ec 2018 had the same problem at 27h. Ignition side bearing broken. Then at 6500km the 2 rusty crankshaft bearings and now at 12000km too. I had changed the cylinder head in the meantime so for me the cause is cylinder or hot porous casings. It must be very low because I have never added coolant. I've been riding motorcycles for 40 years and this is the first time it's happened to me. In fact, this only happens on the 300. I use NTN steel cage bearings. I will try to put a lower radiator cap 1.4bar. I'll keep you informed. French rider.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
2018 ec300 cdi Demi Parts 0 02-13-2021 12:36 PM
2019 ec300 start failure Ashmy19gasgas Enduro Engine - 2 stroke 22 09-24-2019 11:21 AM
2018 ec300 J. JuJu General Discussions & Announcements 3 07-17-2018 05:35 AM
2018 ec300 Fieds83 Enduro Engine - 2 stroke 11 07-11-2018 09:40 AM
main bearing failure right side 2006 ec300, rebuild tips needed. hillbilly Enduro Engine - 2 stroke 11 03-16-2012 04:42 PM

All times are GMT -5. The time now is 07:24 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org