|
Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
wp or zokes diameter at clamps?
Just real quick,, I know its here somewhere but cant seem to find it in the search,, what are the diameter for the wp and zoke forks,, I believe they are the same,, now I might have a set off a husky to use on my old 97 250 and I need to know if I'm going to have clamp issues or I can use GG clamps?
Thanks, Steve |
#2
|
|||
|
|||
upside down units? I was curious and measured mine and my kids last night, there was 1mm differance but I can't remember which one was larger or what they measured. I will check tonight and reply back if someone else doesn't answer your question.
Jeff '00 XC250 43mm WP's '04 EC250 45mm Zoke's |
#3
|
|||
|
|||
I'm sorry,, yes inverted,, I'm ditching the conventional 45's and going inverted on the 97.. I need to be sure the forks I'm looking at would fit.. I have several sets I'm looking at.. Mostly ktm forks as gasgas forks are a little harder to come by..
Thanks, Steve |
#4
|
|||
|
|||
Yes, the inverted WP 43's and Shiver 45's are the same. bottom clamp diameter is 57mm, top clamp diameter is 54mm. Guess I wasn't being too careful when I measured last night (and said there was 1mm differance).
Good luck with your changeover! Jeff. ps, I love the Zokes on my kids bike! |
#5
|
|||
|
|||
Thanks,, Now the question,, The ohlins top is the same but what is the bottom?? I have a good deal on zokes from a husky,, they are 54top and 58 bottom.. So do it the dirty way and cut 1 more mm out of the bottom clamps? or find other bottoms,, or do the fork bodies have enough to spin down 1 mm? The husky axle is real close to the gg axle.. Might even be closer than the ktm axle.. so do the 43wp off a ktm and play with axle issues or go with the husky and have clamp issues??
Decisions |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Outer diameter of Sachs fork at the triple clamps | Leon_gasgas | Enduro Chassis & Body | 3 | 01-20-2010 06:21 PM |
What is the needle jet diameter? | stay_upright | Enduro Intake/Carburetion - 2 stroke | 2 | 07-14-2008 03:27 AM |
triple clamps compatible? Showa vs Zokes | enducross | Enduro Suspension | 0 | 06-17-2008 11:10 AM |
Carb Vent Tube Diameter/Size? | Captccb | General Discussions & Announcements | 1 | 11-05-2007 02:36 PM |