Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-16-2011, 07:42 AM
motogroove's Avatar
motogroove motogroove is offline
Senior Member
 
Join Date: Apr 2010
Location: Madison, CT USA
Posts: 388
Default favorite clamps for oversized bars

2001 xc300 - delivered with 7/8 bars.
I have a set of oversized bar from BRP that work, but I do not love them. The hardware is all wrong, with bolts that are too long, and nuts that are too large in diameter. Hard to find the right hardware to make it fit better. Something about JIS or non-JIS... I end up using a small stack of washers making the whole package no lighter than 7/8 with a crossbar.
And they are just plain clunky looking on the otherwise sculptural GG.

What are your favorite, beswt fitting oversized handlebar clamps?
Are there factory clamps I can retrofit and love?


TIA,
Dean
-OCD much?


Reply With Quote


Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
What is your favorite GasGas engine size? MattR GasGas Member Polls 51 09-11-2014 10:12 AM
Question about bars/clamps? dank Enduro Chassis & Body 6 03-14-2010 07:47 AM
Put a few of my favorite pics up on the website.... Steve@Motowest Pictures & Videos 0 07-14-2009 08:05 AM
Front oversized Rotors cal_tony Enduro Chassis & Body 0 11-01-2008 10:57 AM
oversized floating rotor? wheels7 Enduro Chassis & Body 3 02-21-2007 10:25 AM




All times are GMT -5. The time now is 08:23 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org