Upgrading 2005 to 2014 Questions

[JP4]

Originally Posted by stay_upright

...
Also to set up my '05 I adjusted the high speed compression nearly all the way off and it works beautifully - the standard model won't have the HS compression... I like my bikes very soft...

If it has the Sachs shock it should have a HS compression clicker - mine does.

I believe that it is only the Reiger shocks on the GG that do not have HS compression adjustment. For that matter, I think every contemporary shock other than the Reiger has HS compression adjustment - not talking OE on a DR200 etc.

[GasGasDreamer]

Originally Posted by 95jersey

In the US they only import the racing model.

I think one of the 'issues' that in the recent past GG is that would send bikes that didn't really have the proper components, the ones that were promised from the factory to the importer.

[Simmo737]

Looking at the compression adjuster exploded view it appears to be an all compression adjuster, no restricted flow so if you turn it down it gets softer throughout, this is how it feels as well.

[n_green]

Where did to get the exploded view?

[stay_upright]

Originally Posted by Simmo737

Looking at the compression adjuster exploded view it appears to be an all compression adjuster, no restricted flow so if you turn it down it gets softer throughout, this is how it feels as well.

So it's not like a bleed screw type adjustment to bypass the shims then?

[elemetal2]

What I read about the Reiger is it has truly independent piston bleeds for the compression and rebound (unlike the Ohlins). I know you can buy a port block from Ohlins that will isolate them but that isn't standard. Typically the compression adjust will also effect the rebound which is more of an issue if you have to run heavy springs.