#731
|
||||
|
||||
Rebuilt it..
After the chain snapped all the parts I needed arrived, had the cases welded up last week, fitted the clutch slave and the rear caliper bled the brake and the clutch fitted new rear wheel bearings and the new chain, trimmed the headlight like Leo has above, looks much nicer! Took her for a quick spin around the block to check it all works fine.
__________________
02 300ec- 50mm Marzocchi cc forks, 2010 plastic. Now a 250cc. |
#732
|
||||
|
||||
What I did..
Replaced the rear brk pads, bled/flushed system. Now loaded up to go riding! Its going to be a good day, about 50 deg, and sunny.
__________________
2012 xc300 - Great bike! sold looking for 18+ |
#733
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#734
|
||||
|
||||
|
#735
|
||||
|
||||
Quote:
__________________
Jim Cook Smackover Racing Team LAGNAF '11 Gas Gas EC250 (primary ride) '06 Gas Gas DE300 2004 Gas Gas TXT300 Pro '94 Husaberg FE350 '86 Yamaha IT200 '86 Honda TRL200 Reflex '04 KTM 525EXC (soon to be dual sported) Several others, including project bikes, Deb's bike, and a fleet of grandkids' bikes Let's go riding! http://www.jebruns.com/Wudi19/wudi19.html http://www.ahrma.org/schedules-results/cross-country/ |
#736
|
||||
|
||||
Does the same go for the outer oil in a closed cartridge fork? Mine are KYB sss from a Yamaha. I understand that the viscosity is important inside the cartridge (where I use Ohlins 5 oil), but wouldn't think it matters a lot in the outer oil where I presume the level is more important (as the air chamber affects the spring action). However, I use the same Ohlins oil there.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#737
|
||||
|
||||
A nice looking friend indeed! I wonder if my EC200 would like the same type of company?
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#738
|
||||
|
||||
I'm sure it would. Of course we get the first major snowstorm in months the day I brought it home
Oh well, it will be good for the trails this spring. |
#739
|
|||
|
|||
Looks like an early Spring this year for us. New chain (114 link) and JT sprockets 13-51. Hoping to get rid of the 1-2 shift in tight trails. New Michelin MH3 rear and Washougal sticky front. Exhaust O rings. Brake pads front and rear. Now on to my sons ttr-110 with a GYTR jet kit.
|
#740
|
|||
|
|||
Service and revalve time for the shock at 55hrs. Decided to regrease the linkages and swingarm bearings while I was at it. Didn't need to as it turned out, still plenty of grease in them. But know I now they can go for 50 hrs between services so happy days.
__________________
Current: 2014 Gas Gas EC300R _____________________________________________ Previous: 2011 Gas Gas EC300 ELC 2004 KTM 300 EXC |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DNF today | Pepperami | Enduro Chassis & Body | 6 | 09-18-2013 11:59 AM |
Got my first GG today! | RonMexico | General Discussions & Announcements | 6 | 02-19-2011 12:39 PM |
Went Riding Today and..... | coolum74 | Enduro Engine 4 stroke (including EFI & Exhaust) | 2 | 11-30-2008 01:12 PM |
HELP! I tried to use my gasgas as a jet ski today! | sammyj18 | General Discussions & Announcements | 19 | 11-21-2008 08:01 PM |
SHNF From Today | Boomhauer | Pictures & Videos | 13 | 10-30-2007 04:18 PM |