|
Other GasGas Bikes/Quads Trials, Pampera, Wild HP, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Weird brake light problem. Pampera 2-stroke
Hi,
My Pamoera 250 Mk3 and I, despite our advancing years, took part in a 100 mile Long-Distance-trial. There were a few things requiring attention after many falls in the event, including the brake light being on all the time. The Rear brake master cylinder had taken a whack, the wires were mashed, so I guessed that was the problem. I disconnected the wiring from the loom and started her up; brake light still on. OK, maybe the front brake light switch also has a problem, so I pulled the wire out of the plunger switch. STILL the brake light comes on whenever the engine runs. So, check me out here, what am I missing. BOTH of the switches that can trigger the brake light are disconnected and still the light is on (!!!). Any pointers most gratefully accepted. Mike |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Weird steering problem?? | wence | Enduro Chassis & Body | 13 | 01-01-2013 06:32 PM |
Rear light problem [re-do] | Wilksiee | Enduro Electrical & Wiring | 3 | 05-04-2012 01:30 PM |
I wanted a street legal 2 stroke. How I solved the problem | Bobt250 | General Discussions & Announcements | 11 | 12-27-2010 02:50 PM |
Brake light help | loganlexow | Enduro Electrical & Wiring | 10 | 07-15-2008 11:13 PM |