12-15 Exhaust Pipe reviews

[TorbenS40]

Originally Posted by Rod Overstreet

I have no idea of thickness, but I can certainly attest to the strength of Richards pipe over stock. This thing is beefy. Call Richard at 405-443-8267. Just be prepared to spend at least an hour on the phone

Thanks Rod! Does he have a website? I have a few small companies I deal with at my shop that are the same.....hours of bench racing etc....lol.

[Rod Overstreet]

Originally Posted by TorbenS40

Thanks Rod! Does he have a website? I have a few small companies I deal with at my shop that are the same.....hours of bench racing etc....lol.

http://www.cannonracecraft.com/

[hadfield4wd]

Originally Posted by Rod Overstreet

http://www.cannonracecraft.com/

They also do custom springs. And a are very reasonable

[johnny barber]

I run buds racing pipe and shorty muffler. The pipe is an HGS and its unfinished not plated. Muffler is carbon fiber. Bike pulls much better all across the board. Bottom end was improved as well as a lot more over rev. I'm very happy with it but the lower mount on the pipe needs relocated 2" down. Not a big deal if you can weld.

[memphis2857]

Originally Posted by coopernicus

Torben,

I have a HoH pipe that I'm getting ready to install on my '14 300...Swing by if you want to take a look! My cell # is the same...I also have the silencer but be aware, they are not stamped USFS legal.

Eric

I raced several National Enduros with my HofHP pipe. I just went to RMATV and bought a pro moto billet spark arrestor screen. Take the end cap off the silencer drop it in there and good to go. They don't look for the stamp. Just stick a rod in there to check. Also got checked when I rode at Daniel Boone National Forest. Same thing just looked to make sure it had a screen.

https://www.rockymountainatvmc.com/p...rrestor-Screen


Sent from my iPad using Tapatalk

[Capz85]

Johnny- can you post a pic of your bud racing muffler, I was looking at getting one

[coopernicus]

Originally Posted by memphis2857

I raced several National Enduros with my HofHP pipe. I just went to RMATV and bought a pro moto billet spark arrestor screen. Take the end cap off the silencer drop it in there and good to go. They don't look for the stamp. Just stick a rod in there to check. Also got checked when I rode at Daniel Boone National Forest. Same thing just looked to make sure it had a screen.

https://www.rockymountainatvmc.com/p...rrestor-Screen


Sent from my iPad using Tapatalk

Well, the two times I was checked here they both looked for the "USFS Approved" stamp on the S/A. They do things differently based upon the jurisdiction. I will say that most of the other folks I know here just had the "stick test" looking for an obstruction. However, my experiences are that they check (the last ranger was riding a WR-450!). Regardless, the HoH pipe looks good and the metal appears to be thicker than most. The silencer looks to be well made and the carbon guard is thick, too.

Eric

[johnny barber]

Originally Posted by Capz85

Johnny- can you post a pic of your bud racing muffler, I was looking at getting one

Here's a pic of my buds racing muffler.

[rubber Jonny]

HA HA what the hell is that, first rock you ride past your gonna smash that up!!!

Originally Posted by Rod Overstreet

[IMG][/IMG]

[95jersey]

Originally Posted by Rod Overstreet

Old pictures, from when I put the HoHP exhaust on the 2014. Got it on the 2015 now.

I do need to mention this about the HoHP pipe. While you gain 1 inch in ground clearance at the header portion....you gain a little on the side.

[IMG][/IMG]

What does the larger cover on the left side do?