|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need a new keyed ignition switch. Help!
Hey all, I had a bit of an off and broke my keyed ignition switch.
The bike will still kick start, but e start and my trail computer don't work. Anybody know what part I need to get to replace that switch? Also, I'm wondering about maybe eliminating it altogether. In which case I would need some sort of handlebar switch to turn electricity on and off. Anybody else done that? |
#2
|
||||
|
||||
Quote:
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
On the 2011 models the key switch has two functions.
Key on = make contact on the red wires to enable operation of the start button Key on = break connection of the ground cicuit that shorts out the primary voltage for the ignition (no spark) Key off = break circuit on red wires Key off = make circuit for the ground Bike can be kickstarted by disconnecting the wiring harness to the key switch (ignition grounding is defeated). Later bikes may be different, download the relevant manual from the GG site and follow the wiring diagram.
__________________
2011 EC250E |
#4
|
|||
|
|||
I ordered a switch from maddow cycles but it's backordered.
Anybody know if there is another brand substitute? |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ignition map switch wiring | dANbOT | Enduro Electrical & Wiring | 5 | 04-11-2019 02:23 PM |
WTB ignition switch | nmrider | "Wanted to Buy" & "Want To Trade" | 1 | 02-09-2015 10:09 PM |
Ignition Curve Switch | mcnut | Parts | 2 | 12-10-2014 06:35 AM |
dual ignition switch | ktmguy23 | Enduro Electrical & Wiring | 1 | 09-11-2007 05:21 PM |