|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#41
|
|||
|
|||
Quote:
if your bike has the as2 I belive they run leaner but don't hold me to that. nedw from the rm250 is the one to use in that carb when I put a pj of 42 ini could not start it up and when I did it would not idle and ran badly. ill have a read on your set up and see if I can help
__________________
03 ec300 honda cr500 94 |
#42
|
|||
|
|||
have you inspected the spark plug to check how its running, might be worth throwing a new one in and what is the setting for your air/fuel mixture screw
__________________
03 ec300 honda cr500 94 |
#43
|
|||
|
|||
I have a question related to the topic title .
My settings: '13 EC300 178 main 45 Pilot N3CJ Needle #3 A/S 1.5turns. Sea level. Temperature 5?C to 20?C Bike is powerfull and no complaints. I ride a lot 1/2 to WOT. And ?10% of the time 1/8 to 1/2 But the plug is white, so its too lean. I think it is the needle, and which one is recommend for race? |
#44
|
||||
|
||||
I have to run a 180. But, head has been modified. Must run race fuel 50/50 as well.
__________________
2011 EC300 Six Days 2010 EC300 Nambotin Replica |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ec 300 cck needle | alun | Enduro Intake/Carburetion - 2 stroke | 3 | 12-29-2011 02:53 PM |
needle | jimjim | Enduro Intake/Carburetion - 2 stroke | 4 | 07-23-2011 07:07 AM |
CHN Needle | nsgasser | Enduro Intake/Carburetion - 2 stroke | 3 | 05-21-2011 11:18 PM |
CCK needle | pevs | Enduro Intake/Carburetion - 2 stroke | 2 | 02-25-2010 02:04 PM |