GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Suspension

Enduro Suspension Tuning & maintenance of Enduro forks, shocks, etc


Reply
 
Thread Tools Display Modes
  #1  
Old 08-14-2007, 03:23 PM
bergerhag's Avatar
bergerhag bergerhag is offline
Gold Level Site Supporter
 
Join Date: Nov 2006
Location: Timr?, Sweden
Posts: 675
Default Marzocchi special tool for tearing down fork?

As per the Shiver manual, a special tool R5081AA is needed to split the fork. (Remove the bottom compression valve stuff).

Has anyone got any specs on such a thingy? I will most likely manufacture one myself, there is no chance of getting the real stuff by tomorrow...

It looks like a big hex socket is needed, what's the size?


Reply With Quote


  #2  
Old 08-14-2007, 08:42 PM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597
Default

Not needed. Just use an impact wrench to break the base valve free. The spring guide comes off the damper rod and it can be removed through the bottom of the cartridge like a WP(thanks Les). Easy fork to work on. Only special tool I bought was a seal/bushing driver.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Marzocchi Shiver 45 fork springs Klausen Enduro Suspension 9 12-19-2009 04:55 AM
07 marzocchi fork question wence Enduro Suspension 3 03-09-2009 06:34 AM
Marzocchi Fork Oil Change eff Enduro Suspension 19 04-03-2008 07:55 AM
Marzocchi Fork Guides Eugene Enduro Chassis & Body 1 02-22-2008 07:32 AM




All times are GMT -5. The time now is 01:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org