Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #171  
Old 12-09-2013, 12:25 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Just put a new slug in her again this arv. I've still got to measure up the squish but it should be about 1.3mm as the stack I pulled out was 2 x .3mm gaskets and the one I put back in was a single 0.55mm.

Ring end gaps both came out at 0.58mm and the new ones went in at 0.38-0.40mm as they came out of the box.

In the morning I'll squish it, torque everything back up, and then bolt the Smart Carb on for some more playing around. Got some pics I'll upload later.


Reply With Quote


  #172  
Old 12-09-2013, 02:44 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

This piston has around 85hrs on it. Can't confirm exact hours as the speedo/hour meter has been playing up and resetting itself. I have a replacement to install before I start over with this piston.





Reply With Quote
  #173  
Old 12-11-2013, 07:12 AM
Coop's Avatar
Coop Coop is offline
Senior Member
 
Join Date: Mar 2013
Location: Acme, Pa
Posts: 480
Default

That looks pretty good for 85hrs.
__________________
-Mike
2009 Beta Evo 300 4T - 1982 Suzuki PE175
Reply With Quote
  #174  
Old 06-23-2014, 03:12 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Quote:
Originally Posted by Jakobi View Post

And for reference, this is where I set the spring at rest. Took some effort to bring it right around but the kicker recoils all the way as expected.
Bumped for Savage Sausage
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
First Top-End Rebuild on a 2007 EC250 speedy08 Enduro Engine - 2 stroke 9 06-22-2011 09:16 PM
EC250 engine rebuild? robszombie Enduro Engine - 2 stroke 3 12-07-2009 11:38 AM




All times are GMT -5. The time now is 05:42 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org