2012/13 Silencers

[wa_ndro]

Has anyone tracked down an offroad silencer yet for the 2012/13 300's?
Looking through threads, it seems the LV is a no go. Has anyone tried the Scalvini or know of any other brands out there.....?

I found this one, but have never heard of it...

http://www.knobby.eu/en/art/exhaust-...s-250-2013.php

and the Scalvini

http://www.scalviniracing.it/eng/pro...catalogo1=ALAF

[swazi_matt]

contact richard wilson at http://www.houseofhorsepower.com/ they make a nice silencer (cannon) good bottom end power and sounds so sweet (everyone comments on it)

[rosco]

I think the one that comes on them stock is pretty tough to beat.

[GasGas]

The stock FMF Q Stealth is an over weight spooge factory pile of doodoo. I had to fix mine a few times as all the mounting holes wear out from the weight of all the spooge.
I wish GasGas would go back to making their own like they used too.

[StuJohnson]

Not sure what others are saying about the LeoVince one..?
But I love it on my 2012 300 !!!!

[john r b]

I have Cannon R/C power unit on both my Gasser's Way better than the stocker.

John
'12 250e
'12 200

[Wimpy525]

Originally Posted by StuJohnson

Not sure what others are saying about the LeoVince one..?
But I love it on my 2012 300 !!!!

I like the LeoVince as well. Made a huge change on the 13

[AZRickD]

The Q-Stealths are that bad, eh?

[Simmo737]

You can have a hanging idle, two steps too lean everywhere else and it still spooges unless you ride at 8/10ths plus all day. Exhaust noise is all about shearing of the interface of fluid flow, the only way to stop it is to create turbulence ( look at the sawtooth diffusers on the engines of very late model jets). The stealth does it by rotating the exhaust flow prior to exit into the steady state air, slowing it down a lot, allowing the spooge to trap, quiet but dirty.

[wa_ndro]

Originally Posted by swazi_matt

contact richard wilson at http://www.houseofhorsepower.com/ they make a nice silencer (cannon) good bottom end power and sounds so sweet (everyone comments on it)

Emailed Richard, $140 with no spark arrestor. Pretty hard to beat that, will let you all know how it goes.