Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Product Reviews

Enduro Product Reviews Feedback & Comments on Products Tested


Reply
 
Thread Tools Display Modes
  #1  
Old 12-19-2008, 10:48 PM
Grampy Grampy is offline
Member
 
Join Date: Dec 2008
Location: Port Orchard, WA
Posts: 32
Question Enduro Tool Kit

Any recommendations on an enduro tool kit? Back pack or fanny pack preferred.


Reply With Quote


  #2  
Old 12-20-2008, 09:13 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

It's a hard question to answer, since it depends upon where you're riding, how far from civilization/your truck, maintenance abilities, etc..

For me, I ride singletrack that is typically 25 to 35 miles loops. The trails tend to cross many backroads/jeep trails so I could shorten a route in an emergency. Over the years, I have reduced what I carry and now carry the basics or bare minimum (still more than my buddies carry).

I used to use a fanny pack, but I don't like the weight on my hips and banging around. I use a camelback with extra storage capabilities. I bought it at Costco (I think the pack is called High Sierra)... anyways it looks like the camelback Mule version. I carry my water, some granol bars, my tool wrap, tow strap, car keys, cell phone, photocopy of license and insurance info, and $20 (for emergencies).

In my tool wrap, I have the basic necessities to fix most things on the trail. This covers most of the minor repairs and gets me back home.
  • 8, 10, 12, 13, 14, 15mm combo wrenches (these have a different size on each open end). You give up the box end but you minimize the number of wrenches.
  • T-handle with similar size sockets including 6 and 7 mm (for carb & hose clamps).
  • Multi-purpose tool (like Leatherman) which has pliers, sidecut, knife, etc.
  • Folding tool with allen wrenches (4, 5, 6mm) and screwdrivers (straight and phillips). Tusk makes a nice cheap one (from RockyMountain ATV/MC).
  • Miscellaneous items like zip-ties, master link, and section of fuel hose (to transfer gas in emergencies).

I do not carry tire irons or tube, unless it is a "long distance" trip. Most trail rides, I can ride back with a flat tire, zip-tied to the rim in emergencies. So, I typically don't carry them.

Hope this helps!!!
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #3  
Old 12-21-2008, 09:53 AM
gasgasman's Avatar
gasgasman gasgasman is offline
Super Moderator
 
Join Date: Jul 2006
Location: Pearland Texas
Posts: 4,598
Default

Carry an extra spark plug too.

On the fuel hose:
Make sure it's about 2 ft long.
I see guys trying to pour gas in a coke can etc.
All you have to do is, hook both petcocks together and the fuel will equalize between both tanks.
Reply With Quote
  #4  
Old 12-21-2008, 11:02 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,601
Default

I carry what Matt does in a fanny pack, plus a couple of plugs, mini chain breaker/links/master link, wire, zipties, misc hardware, and some quicksteel (the mini chain breaker made a nice brake pedal tip on my bro's Husky 450). The Camelback is a great place for the fuel hose, you can eaisly coil up a few feet. Large electrician size zip ties for fixing a flat to the rim too. For longer expedition type rides in new territory we carry a couple tubes, pump, tire irons, shifter, and throttle cable amoung the group.
Reply With Quote
  #5  
Old 12-21-2008, 01:27 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

Almost forgot... locking needle-nose pliers (vise grip).
These can be used as a temporary shift lever, brake lever, clutch lever, etc.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #6  
Old 12-23-2008, 10:38 AM
Loosenut's Avatar
Loosenut Loosenut is offline
Senior Member
 
Join Date: Aug 2006
Posts: 273
Default

If your looking for a ready to go pack, Cruz Tools offers one. I purchased the Roadtech tool roll for my wife to carry in her fanny pack. I'm impressed that it has a good assortment of decent tools and I steal it for my street bike trips.
__________________
Mike Baxter

2005 GasGas EC300 (Ohlins front and rear)
2007 Yamaha FZ1
2003 Pampera 280(hers)
Reply With Quote
  #7  
Old 12-23-2008, 12:00 PM
Nick's Avatar
Nick Nick is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Nevada
Posts: 560
Default

I let everyone else carry the tools. My bike is ready when i go and if something breaks, wouldnt have the part anyway.
__________________
Dont follow me, You wont make it.
Reply With Quote
  #8  
Old 12-23-2008, 02:32 PM
Grampy Grampy is offline
Member
 
Join Date: Dec 2008
Location: Port Orchard, WA
Posts: 32
Default

Good plan! I just need to make sure my buddies carry the right stuff.
__________________
Grampy
2003 Gas Gas 250EC
2008 Suzuki C50T
"Forever runnin against the wind"
Reply With Quote
  #9  
Old 12-24-2008, 07:23 AM
rpduc rpduc is offline
Senior Member
 
Join Date: Feb 2008
Location: Minnesota
Posts: 419
Default

Nick's got a point. I always drag tools around and have yet to use 'em.

I'm curious why folks opt for a fanny or backpack over a fender bag.

I got a little (MSR?) bag that was supposed to hang off a roost guard with zip ties and instead zip tied it to my fender and added a velcro strap to suck it all together so tools don't rattle around. It holds more that enough stuff and I never notice it.
__________________
Ross
'05 MC 250
'91 Husky 610wxe
'04 Duc M800 R.I.P
'06 Duc S2r 1000 R.I.P
'07 Duc S2r 1000 still rubber side down...
----------------------------------------------------------
May be so... May be not so...

My Website
Reply With Quote
  #10  
Old 12-24-2008, 11:39 AM
GMP's Avatar
GMP GMP is offline
Senior Member
 
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,601
Default

My bike is always among the best prepped on any given ride. Usually my tools are used on other bikes to keep things going. Also, you do not want to be caught in the woods here with a dead bike, could make a bad day worse.

Fender bags tend to beat themselves apart from the inside out. Think about it, the rear of the bike is moving a lot more than your butt.
Reply With Quote
Reply




Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tool Kit carlg General Discussions & Announcements 4 01-22-2010 09:21 PM
Whats in your tool bag? sierrarider General Discussions & Announcements 4 11-21-2008 05:58 PM
So What Is In YOur Tool Pouch? Boomhauer General Discussions & Announcements 18 04-11-2008 04:04 PM
for my tool box steve Enduro Engine - 2 stroke 4 01-22-2008 09:19 PM




All times are GMT -5. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org