|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Lowering Pegs
Whats the easiest way to lower my footpegs. I am looking for about 10mm?
Ta D
__________________
2009 EC300 Racing |
#2
|
|||
|
|||
Buy some IMS pegs for a late model Yamaha that are made with the low design. Several pair on Ebay. Check out the cross reference page on the home page for details.
__________________
It's all about the angle of the dangle... 2003 Gas Gas 250 EC Southern Ohio |
#3
|
||||
|
||||
The expensive way is to buy the Pivot Pegs and swap the right and left mounts. This is supposed to get you about 12mm lower. I have em on my KTM but have not tried it. Really like them by the way and so do my knees. Some people say they can't adapt to them but it took me all of 10 minutes or less and I was totally comfortable with them.
http://www.pivotpegz.net/
__________________
07 EC 300 (under 500 miles, selling soon) 97 KTM 250 EXC (sold) 2016 Trek Remedy 29er |
#4
|
|||
|
|||
You can also lower the stock pegs if you are handy in the shop (and low on cash). Hack-saw off the round nub on the bottom pivot portion of the stock peg. Reweld to the the top side. Now your right peg fits on the left side of the bike and vise-versa. I did this on my bike 6 years ago and it worked great.
__________________
jeff '00 XC250 (mine) LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion. '04 EC250 (the kids) (he can do his own mods haha!) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lowering Rear Brake Pedal Height? | 2whlrcr | Enduro Chassis & Body | 9 | 08-29-2010 06:17 PM |
lowering bike | Silver | Enduro Suspension | 6 | 03-16-2010 10:35 AM |
Kamikazi Stand and Lowering links | TeeJay | Enduro Chassis & Body | 7 | 10-13-2006 01:17 PM |
lowering links | d251man | Enduro Chassis & Body | 2 | 09-30-2006 08:21 AM |