|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#51
|
||||
|
||||
Quote:
A Suzuki sprocket that does fit is from a DR 250 or DR350 from 1990-1995. I know it fits because I have two for my 2001 xc300 I am not sure if GG hubs have changed since 2001. I'm looking forward to seeing how you work this out. <<<<<edit> oops, didn't notice how old this thread was HTH Dean
__________________
Thanks to FLY Racing. Last edited by motogroove; 06-20-2011 at 07:07 AM. Reason: need more coffee |
#52
|
||||
|
||||
Suzuki made two different DR models in two different sizes during those years: the regular DR and the "S" model. Only the rear sprocket from the "S" model will fit gassers. The sprockets you have must be for a DR250S or a DR350S.
|
#53
|
||||
|
||||
Motogroove,
Look back at my posting from October and it shows what Kawasaki wheels fit for sure and what I speculate will work from some quick research. I forgot to make the update from my test on the later Kawasaki rear wheels as I picked up a 2003 KX 250. That wheel will not fit without some major thought. The 2003 (and I expect newer) KX rear axle was a larger diameter than the one from my 1999 KX 250. While you may be able to find a bearing that will fit the hub and match the GG axle I was not able to verify sprocket and disc spacing. Good luck finding something else that fits and please post if you do find something! Eric
__________________
2018 GG 300 GP 2014 GG 300 Racing E 2002 ATK 605 Dual Sport 2003 KX/KDX 220 hybrid 2021 Kawasaki KRX 1000 Trail Edition 1974-86 Vintage Can Ams, SWMs, Puchs, etc. |
#54
|
||||
|
||||
Quote:
Thanks to Coopernicus for the KX update. I posted that other thing before reading all the pages. dirtstars on ebay seems to be the best idea. An extra set of wheels would be nice for many reasons.
__________________
Thanks to FLY Racing. |
#55
|
||||
|
||||
Quote:
DR250 L/M/N/P 90-93 DR250 L,M,N,P Off Road 90-93 DR250 S-L/M/N 90-92 DR250 SE-P,R Off Road 93-94 DR250 SE-P,R,S Off Road 93-95 DR250 SE-P/R/S 93-95 The DR250 models without the "S" use the JTR808 sprockets while the "S" models all use the JTR822 sprockets same as GasGas and late model Huskys. http://www.jtsprockets.com/52.0.html...el_uid=6851&p= |
#56
|
|||
|
|||
so the coclusion is?
kx250 pre2003? will fit, with no mods other than spacers? pre90 model cr250 rear? is this correct? not worried about sproket or rotor crossover, just hub/wheel... cheers |
#57
|
|||
|
|||
I went to the RAD website, and called them for some clarification.
Eco hub $280 ("Our strongest hub. It does not have the fancy drill outs and it weighs more, but it is probably our strongest hub.) Heavy duty spokes $70 DID wheel 18x2.15 $164 For a total (sans bearings and other stuff.) of $514. |
#58
|
|||
|
|||
Did the ktm fit on the gasgas
|
#59
|
||||
|
||||
No, KTM wheels do not fit Gasgas.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
plastic fitment | randy | General Discussions & Announcements | 11 | 02-03-2010 03:03 PM |
air filter fitment | wence | Enduro Engine - 2 stroke | 6 | 12-23-2008 09:49 PM |
Gaerne SG 10 Fitment Question | Boomhauer | Enduro Product Reviews | 5 | 12-16-2008 07:04 PM |
Aftermarket wheels. | Ud_luz | Enduro Chassis & Body | 3 | 12-08-2008 05:59 PM |
Gear box mess (circlip fitment) | craigyboy | Enduro Engine - 2 stroke | 2 | 10-28-2008 10:11 AM |