Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 03-31-2010, 11:10 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default LTR or JD Jetting Kit

Hi,

I don't know if the was already discussed.
Can somebody tell me the difference between the JD Kit and the LTR Kit?

Thank you
Elvis74


Reply With Quote


  #2  
Old 04-01-2010, 09:16 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Since nobody has chimed in I will give it a shot. I hope I won't totally mess this up, if so someone please correct me....
I think the kits are pretty much the same. Difference was if you ordered from Les he would throw in the needle he thought would compliment your riding style and altitude. I think he marked the kits -1, 0, and 1 to identify the needle he supplied but I'm not totally sure. They were aftermarket needles, probably the same that JD uses but he would polish off the ID marks (CCK, CEK, etc). LTR doesn't supply these kits any more although there may still be some available through GoFasters and other dealers.
Another thing Les was good at was customizing the jets he supplied for your riding style and bike. My '00 XC250 uses jetting larger than most anyone else here on this board, even 300 owners. 48 pilot and 180 main. He knew that. I would never have gone that high with the pilot by experimenting as it acted like I needed to go down from the 38 pilot it came with.
A few here have used the JD kit and I don't remember hearing anything negative.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #3  
Old 04-01-2010, 09:21 AM
SpeedyManiac's Avatar
SpeedyManiac SpeedyManiac is offline
Senior Member
 
Join Date: Aug 2006
Location: On the seat of my Gasser. Or Rossland, BC
Posts: 1,010
Default

The JD jetting kit is great! I highly recommend it.
Reply With Quote
  #4  
Old 04-01-2010, 01:49 PM
Skidad's Avatar
Skidad Skidad is offline
Senior Member
 
Join Date: Dec 2007
Location: Littleton Massachusetts
Posts: 1,209
Default

Yeah, from everything I've read the LTR needles are off the shelf CEK, CCK etc just as jostby mentioned. The JD needles are custom and usually triple taper which tend to have more hit than the straight taper CCK, CEK type needles.
__________________
07 EC 300 (under 500 miles, selling soon)
97 KTM 250 EXC (sold)
2016 Trek Remedy 29er
Reply With Quote
  #5  
Old 04-01-2010, 11:39 PM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

OK Guy's,

thanks for relpys. I think I will try the JD Kit.
Reply With Quote
  #6  
Old 04-01-2010, 11:48 PM
Trooper Sam Trooper Sam is offline
Member
 
Join Date: Feb 2010
Location: Perris, CA
Posts: 52
Default

Where would one find the JD kit?
Reply With Quote
  #7  
Old 04-02-2010, 02:44 AM
Elvis74 Elvis74 is offline
Senior Member
 
Join Date: Jan 2007
Location: Good Old Germany
Posts: 811
Default

you will find it here:
http://www.jdjetting.com/xcart/produ...&cat=15&page=1
Reply With Quote
  #8  
Old 04-08-2010, 02:49 PM
kendunn kendunn is offline
Senior Member
 
Join Date: May 2009
Location: SE KY USA
Posts: 232
Default

I just noticed something here http://www.keihin-us.com/tune4.htm

Looks like Keihin makes a triple tapered needle that I bet would be is much cheaper. For the CCK looks like an N85E is the crossover. Well, I thought it interesting anyways, bet thats what JD uses.
__________________
2006 EC300, 2000 XR650R, 2003 EC250, 2001 EC200 (OK, the last two are really my sons).
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
where to go from here. jetting q. dank Enduro Intake/Carburetion - 2 stroke 105 04-11-2011 04:25 PM
04 ec 300 Jetting lordfeyr Enduro Intake/Carburetion - 2 stroke 12 01-26-2010 03:16 AM
Need help jetting an 06 EC 250 piperpilot12w Enduro Intake/Carburetion - 2 stroke 3 11-16-2008 11:19 PM
jetting help for 05 300 please... mackmack Enduro Intake/Carburetion - 2 stroke 5 09-03-2007 05:10 PM
06 300 jetting fury1 Enduro Intake/Carburetion - 2 stroke 1 07-31-2007 06:37 AM




All times are GMT -5. The time now is 05:32 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org