Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 07-08-2018, 10:23 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default The RS125 wheel mystery

So after doing the TZR125 front and GS500 rear SuMo conversion, I eventually decided it was time to get some proper sized wheels and a nice 320mm brake disc. After a bit of a rear on here and the KTM forums, it appears RS125 wheels are the wheel of choice... So what is required to make the buggers fit?

First off, these wheels are from a 2007+ RS125, and are being put on a 2002 EC300.

Front wheel, though the other post states the front wheel requires machining, it does not.

To make fit you require -

2x 25x47x12 bearings
1x 25.1x32(minimum)x78.6mm centre spacer
1x 25.1x32x12 disc side spacer
1x 25.1x32x16 hub side spacer
2x 32x47x7 seals

Adaptor bracket required has 3 holes

Hole 1 - X0Y0 (datum)
Hole 2 - X35Y-2.5
Hole 3 - X51.5Y0

Then it must be milled with 12mm clearance on the holes.

Rear wheel -

Sprocket hub must have 7mm machined off of the disc face, and 6mm off of the hub.

Rear wheel must have 3mm off of the disc face and 3mm off of the hub

Centre spacer remains the same

Disc side spacer 20x32x7mm
Sprocket side spacer (stepped) -

ID 20
OD1 25x18 L
OD2 32x12 L

Then just replace all of the carrier and sprocket bolts with low profile button heads, and off you go !
Attached Images
File Type: jpg IMG-20180705-WA0000.jpg (87.8 KB, 24 views)
File Type: jpg IMG-20180705-WA0002.jpg (77.1 KB, 23 views)
File Type: jpg IMG_20180704_210625.jpg (127.7 KB, 26 views)
File Type: jpg IMG_20180705_201615.jpg (133.6 KB, 23 views)
File Type: jpg IMG_20180706_203002.jpg (130.4 KB, 25 views)


__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote


  #2  
Old 07-08-2018, 01:43 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

S'funny. I've messed around with lots of RS125 wheels and none of them looked like that.
Honda never ran cush drives on their race bikes.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #3  
Old 07-08-2018, 06:01 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

Quote:
Originally Posted by (F5) View Post
S'funny. I've messed around with lots of RS125 wheels and none of them looked like that.
Honda never ran cush drives on their race bikes.
Likely Aprilia RS125 wheels. The street bike, of course, not the RS125R GP bike.
__________________
Phil
(New bike pending...)
Reply With Quote
  #4  
Old 07-08-2018, 08:50 PM
(F5)'s Avatar
(F5) (F5) is online now
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Wellington New Zealand
Posts: 2,062
Default

Just being silly. A mate has one about that era. Not common here.
__________________
'07 EC300 GG
'14 TXT250 GG
'? 496 CPI Cheetah RZ/RGV hybrid
'22 765 Street Triple RS
'21 XTrainer
'69 Stinger T125 Suzuki
'23 TRS 250RR (it's a Trials thing)
Reply With Quote
  #5  
Old 07-09-2018, 12:06 AM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Quote:
Originally Posted by (F5) View Post
S'funny. I've messed around with lots of RS125 wheels and none of them looked like that.
Honda never ran cush drives on their race bikes.

So esoteric it burns !!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
  #6  
Old 07-09-2018, 01:17 PM
Harry's Avatar
Harry Harry is offline
Senior Member
 
Join Date: Nov 2006
Posts: 301
Default

Try and contact WAZ . He has RS wheels shown on this post

http://www.gasgasrider.org/forum/sho...ighlight=super
Reply With Quote
  #7  
Old 07-10-2018, 02:29 PM
motopsycho87 motopsycho87 is offline
Senior Member
 
Join Date: Jun 2013
Location: Suffolk, UK
Posts: 905
Default

Mine are on and running mate cheers though!
__________________
2006 EC300 Enduro - Ignitech CDI - 38/NECW#2/165 FMF gnarly, FMF shorty, .50 front 5.7 rear

2016 RM-Z450
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2008 FSR 450 mystery electrical connector johnalex Enduro Electrical & Wiring 3 12-08-2016 06:52 PM
Ground location and mystery wire RockefellerGG Enduro Electrical & Wiring 4 12-20-2015 09:03 PM
mystery bike contact United Kingdom 2 08-13-2015 04:09 PM
Mystery solved!! Must read!!! Pinittowinit Enduro Intake/Carburetion - 2 stroke 4 09-09-2013 08:35 AM
Mystery Bolt Killed my bike! gtsnowcrack Enduro Engine - 2 stroke 5 04-04-2007 03:41 PM




All times are GMT -5. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org