|
|
|||||||
| Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion |
 |
|
|
Thread Tools | Display Modes |
|
#1
07-20-2012, 07:59 PM
|
|||
|
|||
FSE fuel clips Help
I have a 2002 fse 400. Sad to have to ask but if anyone can tell me how to disconnect these fuel lines at the pump so I can just change the spark plug that would be awsome.
|
|
#2
07-20-2012, 08:07 PM
|
||||
|
||||
|
Very,very carefully.Even then they still break.They're absolute mongrels.Better to remove the hose clips and remove there.Then fit new reusable clips.Later models had a snazzy inline connecter that works tops. Good luck.
|
|
#3
07-20-2012, 09:28 PM
|
|||
|
|||
|
fuel clips
thanks, I'll try disconnecting near the EFI.
|
|
#4
07-23-2012, 11:23 PM
|
|||
|
|||
|
Fuel clips and line
I still dont have a clue how to take these things off, is there a special tool what? I cant get to the other side because the tank is right on top of the clips so is cutting the lines and putting (1/4")quick-connects the only way for me to get this tank off ? And will those 1/4 inch quick-connects fit these lines. Thanks for any advice.
|
|
#5
08-06-2012, 08:43 PM
|
|||
|
|||
|
OK gottem
Figured it out. just push each tab individually and they should stay out of the way(mine wanted to stay in the way)
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Very Cool Clips | Rick | Pictures & Videos | 5 | 09-13-2011 12:15 PM |
| Fuel and AV Gas | kim | Enduro Intake/Carburetion - 2 stroke | 22 | 07-04-2008 11:06 PM |
| Wrist-pin retention clips | FFRDave | Enduro Engine - 2 stroke | 10 | 01-18-2008 09:53 AM |
| Fuel range and fuel light | sanderjavant | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 01-05-2008 02:35 AM |
| Fuel Pump Clips Broken | KTMrider58 | Enduro Engine 4 stroke (including EFI & Exhaust) | 3 | 04-15-2007 04:18 PM |
Linear Mode
