Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Parts

Parts New/Used Components and All Bike Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-2013, 06:07 PM
jeffs2200 jeffs2200 is offline
Senior Member
 
Join Date: Aug 2010
Location: LaVernia Tx, (San Antonio)
Posts: 259
Default complete part out 2011 GasGas 300

I am pretty sure I am going to go ahead and part out my 300 that is for sale here in the classifieds. Here is the deal. I am going to go ahead and list everything up but I will not disassemble or actually take money for any parts until the engine and forks/triple clamps are sold. Once these are spoken for and I have received payment I will continue the part out until all is gone. If you want to call dibs on a part that is fine. I will put you as first in line. I just do not want to have to refund money if I can not sell the big ticket items.

I will try to list all parts I can think of. If you want something not listed just ask.
All prices will be without shipping. I will charge actual shipping unless you want me to estimate. Actual shipping cost will be cheaper. I will accept postal money order or paypal. If using paypal gift option then no fee if not the add 3%.

engine-complete with Rekluse billet clutch basket, new yz kickstart,RB modded head. apprx. 150 hours total. apprx 40hrs on current top end. runs great no problems
$1500 or $2000 with Rekluse core EXP2.0 with low hour Rekluse cr fibers.

Complete Sachs forks with TTX cartridges and triple clamps $1100 if you want the forks with Sachs internals only $600

Sachs internals $150

TTX cartridges $600

Rekluse Core exp 2.0 $500

carb 38mm $150

Bullet Proof Radiator Gaurds-silver- fits many year models check with BPD -$100

Front and rear wheel with rotors, sprockets, rim locks Tires optional. $250 each or $450 for the set.

Motosportz submount damper $275

Brand new Leo Vince silencer never ridden with - $100

front brake complete $100

rear brake complete $100

2011 frame with mso $200

subframe $75

swingarm $100

Linkage with stock pull rods- bearings are fresh $100

LTR shorter pull rods (makes rear higher and stiffer) 120mm $50

stock tank with new petcock $100

Clarke 3.2 Gallon tank with petcock $100

Radiators $150 for the set

stock pipe and eline cf gaurd (small dent just above gaurd) still very good shape $100

Seat with Guts tall soft foam and Guts cover with small patched tear $50

front axle $25

rear axle $25

all plastics and airbox/ rubber intake boot (missing mudflap) $100

cdi $65

Coil $40

ee aluminum skidplate $25

I am sure I am forgetting some stuff so just ask. If you want a package deal for example frame,sub , plastics etc. just ask.

I will list my paypal once the engine and forks are spoken for. I can send pics on request or just look at pics on my ad in used bikes for sale.


Reply With Quote


  #2  
Old 10-01-2013, 06:24 PM
nmrider's Avatar
nmrider nmrider is offline
Gold Level Site Supporter
 
Join Date: Aug 2010
Location: Rio Rancho NM
Posts: 71
Default Rear wheel

I will take the rear wheel if you end up parting it out.

Thanks
Harold
Reply With Quote
  #3  
Old 10-01-2013, 06:28 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

I hate to see this happen to a beautiful bike.
Reply With Quote
  #4  
Old 10-01-2013, 06:34 PM
andykr87 andykr87 is offline
Senior Member
 
Join Date: Jun 2011
Location: Southern Indiana
Posts: 249
Default

put me in line for the plastic, id like to see pics. if you sell the motor and forks contact me thanks
Reply With Quote
  #5  
Old 10-01-2013, 06:38 PM
desertgasser300 desertgasser300 is offline
Banned
 
Join Date: Feb 2011
Location: Hot A@% desert AZ.
Posts: 1,872
Default

If you decided against the plastics Andykr, I'd like next dibs?
Reply With Quote
  #6  
Old 10-01-2013, 06:43 PM
jeffs2200 jeffs2200 is offline
Senior Member
 
Join Date: Aug 2010
Location: LaVernia Tx, (San Antonio)
Posts: 259
Default

damper has been spoken for also if part out goes through.

I also kind of hate to see it but I just think it is the best option.

If you want to speak for something post in this thread so everyone can see who spoke first. I went through some drama parting a KTM 200 on KTMTALK a couple years back.

Like I said pictures can be seen in my for sale thread. I will try to post link. If you want specific pics just let me know.
Reply With Quote
  #7  
Old 10-01-2013, 06:47 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,994
Default

Could be interested in parts. Postal will be killer
Reply With Quote
  #8  
Old 10-01-2013, 06:48 PM
j_franich j_franich is offline
Member
 
Join Date: Oct 2012
Location: Fairbanks, AK
Posts: 23
Default

Quote:
Originally Posted by jeffs2200 View Post
damper has been spoken for also if part out goes through.

I also kind of hate to see it but I just think it is the best option.

If you want to speak for something post in this thread so everyone can see who spoke first. I went through some drama parting a KTM 200 on KTMTALK a couple years back.

Like I said pictures can be seen in my for sale thread. I will try to post link. If you want specific pics just let me know.
I'm the culprit that used the PM feature to speak for the damper in the event that this bike gets parted.
__________________
'05 EC200
Reply With Quote
  #9  
Old 10-01-2013, 07:20 PM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Here is a link for the bike......wow.....this is not going to end good!

http://www.gasgasrider.org/forum/showthread.php?t=15777
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #10  
Old 10-01-2013, 07:54 PM
redrider's Avatar
redrider redrider is offline
Senior Member
 
Join Date: Oct 2011
Location: Virginia
Posts: 133
Default

I'll take the whole thing.
PM sent.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off





All times are GMT -5. The time now is 05:23 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org