Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > Classified Advertisements > Used Bikes

Used Bikes Used Bikes For Sale - No Part Outs


Reply
 
Thread Tools Display Modes
  #1  
Old 05-06-2014, 05:14 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default 2008 Husqvarna CR165 / WB165 (Michigan) - SOLD

SOLD..SOLD..SOLD..SOLD..
2008 Husqvarna CR165 / WB 165


This has been my favorite singletrack / woods bike. Unfortunately, my family responsibilities have kept me from riding it. This bike is fully dialed-in and ready to ride / race. It needs nothing in my opinion except a rider looking for a great bike to enjoy.

I purchased the bike in December 2009. The bike will be sold with the items listed below. Bike has been well maintained and runs excellent. I always keep a maintenance log that documents my bike work, settings, etc, since I have owned it. This will be provided to the next owner.

The bike has the following items:
* Michigan title (clear with no liens)
* 165cc, 2-stroke engine. Developed by Walt from CafeHusky.com (often referred to as WB165).
* Mileage = 1229 miles.
* Hour Meter. 75 hours on bike. 25 hours on 165cc top end.
* 165cc Cylinder + Modified head (squish band). Set for premium unleaded fuel (93 Octane).
* Suspension springs: Rear spring rate = 5.4; Front spring rate = 0.38. Set for 170 lb rider.
* Billet aluminum case saver/front sprocket guard. Custom designed and fabricated.
* Keihin PWK 38mm with JD Jetting kit.
* Carb Modifications by RB Designs: Includes divider plate, low circuit mods, and adjuster screw.
* 7oz. flywheel weight + custom spacer for side cover (2mm offset).
* FMF Fatty Exhaust Pipe (KTM 200SX). Custom fitted for Husky engine.
* FMF Turbine Core2 spark-arrestor
* Moose racing skid plate
* Old Fat Guy Racing radiator guards
* TrailTech Endurance computer + Billet protector
* T.M. Designworks Chain Guide + Powerlip Roller
* Enduro Engineering Rear Rotor Guard
* Cycra Pro-Bend Hand Guards
* Pro-Taper Contour Handlebars (Woods High Bend)
* STR fork bleeder valves
* Cemoto Graphic Kit (Shrouds + Fenders)
* Ride PG Sidepanel and Front Plate Graphics
* Custom Swingarm Graphics
* Custom Front Fork Graphics

PRICED TO SELL!
Bike with above items = XXXXX


Bike is available for local pickup. Delivery may be arranged within 50 mile radius.
You may reach me by PM or email.

I have provided photos below of the main items. Let me know if you need any other photos of specific areas.


Here are the glamour shots:










Cemoto Graphics Kit:



__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165

Last edited by MattR; 05-28-2014 at 08:35 PM. Reason: Sold
Reply With Quote


  #2  
Old 05-07-2014, 04:36 AM
Darrendeep6 Darrendeep6 is offline
Member
 
Join Date: Jun 2013
Posts: 72
Default

Beautiful bike, I'm sorry you're letting it go. Where in Temperance are you? I'm inn Silo Meadows off Stearns and Douglas.
Reply With Quote
  #3  
Old 05-07-2014, 12:14 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Beautiful machine!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #4  
Old 05-07-2014, 02:42 PM
firffighter's Avatar
firffighter firffighter is offline
Senior Member
 
Join Date: May 2008
Location: Boring, OR
Posts: 714
Default

We've got a bunch of NW guys who ride these bikes and swear by them for tight woods. I'd love to try one.

Great looking bike.
Reply With Quote
  #5  
Old 05-07-2014, 07:50 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

Thanks for the kind comments guys. Yes, it is a fantastic bike and I hate to see it go. Hopefully, another rider will fall in love with it as much as me. There is a bunch of us on CafeHusky that ride the 165's thanks to Walt.

Pass the word along if you have a friend looking for bike fully set up and ready to go.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #6  
Old 05-07-2014, 07:58 PM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

Quote:
Originally Posted by Darrendeep6 View Post
Beautiful bike, I'm sorry you're letting it go. Where in Temperance are you? I'm inn Silo Meadows off Stearns and Douglas.
Darren,

I'm not too far from you. Nice to see another local on this forum. I'm near the Erie and Jackman area.

You should take a moment and update your user profile with your location and bike info.

Thanks for checking in.

Matt
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
  #7  
Old 05-07-2014, 11:22 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

I just noticed your red marking on most of your bolts......that is a good idea!
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
  #8  
Old 05-08-2014, 09:44 AM
firffighter's Avatar
firffighter firffighter is offline
Senior Member
 
Join Date: May 2008
Location: Boring, OR
Posts: 714
Default

Also noticed the quick access flat blade screwdriver for carb or fork adjustments. Brilliant.
Reply With Quote
  #9  
Old 05-08-2014, 10:44 AM
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: Aug 2006
Location: Lodi, Ca
Posts: 1,930
Default

Quote:
Originally Posted by firffighter View Post
Also noticed the quick access flat blade screwdriver for carb or fork adjustments. Brilliant.
The knob for the carb adjustment is brass, knurled so it is easy to make "on the fly" adjustments, that is a RD Designs mod carb. My 38mmTMX has the same knob / adjustment screw.
http://rb-designs.com/rb_designs_llc_015.htm
__________________
Rick
99 EC 200
06 RM 250
AMA D36
375X
OTHG
375S

***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals
Reply With Quote
  #10  
Old 05-08-2014, 11:34 AM
MattR's Avatar
MattR MattR is offline
Super Moderator
 
Join Date: Jul 2006
Location: Temperance, MI
Posts: 958
Default

Rick, you are correct on the carb air screw adjustment since I had RB Designs modify my carb.

Firffighter, you noticed my ultra-stealth small screw driver zip-tied to my subframe. It works great on standard carbs without the RB Design adjuster screw and front/rear suspension clickers. The rear shock can be tricky but still accessible to turn the rebound adjuster screw. It also is good for bleeding the fork screws if you don't have the quick-bleeder valves.

Moto7man, I always paint mark my bolts/nuts. It provides a quick visual to see if any has loosened. Plus, when I disassemble and re-torque the bolts/nuts, typically my torque wrench is clicking off very close to the previous mark as a double-check for me.
__________________
Matt
Current: 2009 Yamaha FZ1
Previous: 2001 GasGas TXT280, 2001 GasGas XC250, 2004 KTM 200EXC, 2007 GasGas EC250, 2007 Husqvarna SM610, 2008 Husqvarna WB165
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


Similar Threads
Thread Thread Starter Forum Replies Last Post
'13 XC250 Michigan Sarge184 General Discussions & Announcements 10 03-05-2013 10:03 AM
Is there anything like St.Joes in Michigan? forgiven Mid-West Forum 13 08-29-2012 09:48 AM
2008 Husqvarna CR125 MattR All Other Bikes... 17 04-27-2010 03:54 AM
michigan dirtjunky NorthEast United States 0 12-25-2006 08:18 PM




All times are GMT -5. The time now is 03:37 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org