Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #111  
Old 06-22-2016, 11:15 AM
Bobt250's Avatar
Bobt250 Bobt250 is offline
Platinum Level Site Supporter
 
Join Date: Nov 2010
Location: Pittsburgh, Pennsylvania
Posts: 203
Default

Here is a series of videos that tell you everything you ever wanted to know about the GG starter and how to fix it. This guy did an amazing job and these videos should be in a sticky.

If this info is already here forgive me, I missed it.

http://www.youtube.com/watch?v=gk-cu42OJQk


__________________
2011 EC300
Reply With Quote


  #112  
Old 01-29-2018, 09:28 AM
giov81 giov81 is offline
Member
 
Join Date: Jan 2017
Posts: 5
Default

hi, I have the same problem on my gasgas ec 2015 the bendix wheel, all the gears are a place but not to cross over the gear wheel.
I also tried with the battery of the car but it does not work. some time ago I changed the gear with a piaggio scooter but I did not read about extending the spring. therefore if enlarged the spring that holds the weights could work.
greetings from Italy
Reply With Quote
  #113  
Old 11-21-2019, 06:17 PM
Spanish Christini Spanish Christini is offline
Member
 
Join Date: Sep 2019
Posts: 9
Default Finally!

Finally found this thread! LOL I watched anesthesiadreamin's eight-part youtube video on the subject, but I couldn't remember the GGrider's member he named that he got all the info from.

Subscribing now before I even read it, so I don't lose it.

Here is number eight in that video series:


GasGas Starter FIX part 8 FINAL:
https://www.youtube.com/watch?v=6rwq9RemuQI
Reply With Quote
  #114  
Old 05-11-2020, 02:03 PM
Erhard Erhard is offline
Member
 
Join Date: Aug 2014
Posts: 6
Cool

Found this too late, sold my GasGas. I had tried all kinds of mods. After first broken set of Bendix and flywheel gear, i got the spacing right on the secound very expensive set.
But the Starter in best case (clean and relubed with very little thin oil) always only worked as a Re-Starter for warm engine.
I am a bit dissapointed that GasGas over the years never refined the springforce in the Bendix and a customer must come and find working Honda parts.
I think that the spring was strengthened because the Bendix works vertical and every bump might push down the gear.
Did anyone observe an engaging noise when landing from a jump or see a respective wear on the parts?

Great forum!

Regards,
Erhard
Reply With Quote
  #115  
Old 08-16-2020, 11:38 AM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

I finally decided to sort the starter on my 2011. Below is part six video of the previously posted thread. My ring gear was in great shape and my GG bendix was in good shape too, not rounded or chewed up at all, it just would not engage.I bought the listed CH 80 starter on Amazon and last night I followed the video directions and IT WORKS PERFECT!
https://youtu.be/VxGcd1eqdd8
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Anybody have an 02/03 450 FSE that actually works ? wakeymatt General Discussions & Announcements 5 08-09-2012 06:07 AM
Does anyone know how the compression release works? stay_upright Enduro Engine - 2 stroke 1 07-24-2009 10:37 AM
04 300 fork kit - Pivot Works bocoz702 Enduro Suspension 2 02-12-2007 08:24 AM
300xc what gearing works best?? Dingoe Enduro Chassis & Body 6 02-05-2007 03:47 PM




All times are GMT -5. The time now is 06:48 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org