|
Enduro Product Reviews Feedback & Comments on Products Tested |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Moto-StyleMX graphics!
Well, I've been beating on this poor bike for several years now and it shows. In fact, I bought a 06 EC300 earlier this year to rebuild, and it was a bit of a wake up call when I took it apart and it was in nicer condition than my 2013 that was in new condition when I bought it .
Anyhow, I figured it was time to do a graphics kit and replace a few of the plastic pieces. I picked a kit from Moto-StyleMX and contacted them about making a few small changes. They said. I problem, and didn't charge anything additional for them. The kit is high quality and I noticed a few big things that I liked better than the other big name graphics. One is that the glue has a pattern on the back. Similar to 3M Di Noc. This makes it much easier to apply without getting as many air bubbles. The second thing I noticed was that they didn't seem to scratch as easily as as some of the others as you rub the graphics onto the plastic. I've seen some of them leave scratches just from using my hand. Small and slight. But scratched nonetheless. Anyway. Quality is awesome and customer service was awesome. On mine I changed "Pirelli" to "Maxxis" and "Pivot Works" to "FMF". I didn't install the front fender/air box/subframe/swinger graphics.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#2
|
||||
|
||||
Wow really nice ! I like how clean and nice open areas for numbers .
__________________
IF I HAD ALL THE MONEY I SPENT ON DIRT BIKES , I WOULD SPEND IT ON DIRT BIKES |
#3
|
||||
|
||||
I've dealt with them before as well. Would second the great customer service and quality kits!
Your bikes looking pretty clean Shang! Makes my 2013 look like a bucket. |
#4
|
|||
|
|||
Quote:
But it all still works and I had fun doing it!
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#5
|
|||
|
|||
What head lamp is that?
Graphics look great! |
#6
|
|||
|
|||
Thanks! The headlight is a LED flood light for a truck. I designed a housing for it to fit in the factory location and had a friend 3D print it for me.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#7
|
|||
|
|||
Oh nice! Aren't you clever
|
#8
|
||||
|
||||
If you had one printed, can you print another? You know, just curious...
__________________
Phil (New bike pending...) |
#9
|
|||
|
|||
Quote:
Here is the light I used. (I added the yellow film) it is a flush mount backup light off amazon I think. Here is my rendering. Light mounted. I did have to cut the heat sink shorter on the back of the light to clear the head tube on the frame. It's not a great light pattern but it's much brighter than the stock light. I recently added this as well so that I can extend our short days a little.
__________________
2013 GasGas XC300E 2005 YZ290 1973 Honda CB175 1997 KX60 1983 Yami Tri-Zinger 1984 Suzuki Alt 50 1969 Trail 90 1971 Trail 90 1972 Trail 90 |
#10
|
||||
|
||||
Quote:
Heck, I might just buy the lights and figure out some Redneckistan mounting options. I can render something up in aluminum with a hacksaw, bench vise, and a rat tail fie.
__________________
Phil (New bike pending...) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Vet Moto | JP4 | Pictures & Videos | 3 | 07-14-2015 07:55 AM |
GasGas Graphics from MAD COW MOTO! | Rod Overstreet | Enduro Product Announcements | 8 | 05-22-2014 08:31 PM |
Moto 9 Helmet, M | singletracker | Other Stuff... | 2 | 04-11-2013 04:31 PM |
moto-stylemx graphics | armyoforange | Enduro Product Reviews | 2 | 01-01-2012 09:04 PM |