|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Frame gaurds
Hey guys. I am in need of frame gaurds for my 04 ex 300.what other newer years model frame gaurds will fit. Thanks. Scott
|
#2
|
||||
|
||||
I think anything up to and including 2011 will fit.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
Thanks. I see you are running the lectron carburetor. I have been considering one for the simple reason of never fooling with jets again. Thoughts? Thanks. Scott.
|
#4
|
||||
|
||||
The Lectron works very well in my bikes. It worked so well that I moved it from my old 06 model to the 2015 when I bought that one.
I purchased it directly from the factory in the US. Just told them what bike I had and received a carb that was plug and play. I'm very happy with it, have used it for at least 350 hours riding over the last 6-7 years.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#5
|
|||
|
|||
As long as everything else on your bike is good they are great. With a jet carb you have a lot more adjustment to jet around issues you may not even know you have but not so much with the Lectron. I just experienced this with my 18, I could get the Keihin pretty good but not the Lectron due to the gigantic squish of the stock head. I corrected my squish and now the Lectron works great.
|
#6
|
||||
|
||||
In my '15 200 the Lectron worked ok even with oem squish, but after I turned down the head, everything, including carburation, of course worked better.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc Last edited by Anders; 01-31-2020 at 04:05 AM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiator gaurds | Gas gas 1985 | Enduro Chassis & Body | 0 | 09-12-2014 07:37 PM |
Link to WEC Heinola Finland Frame by Frame | REVERUP | Pictures & Videos | 0 | 09-16-2012 09:31 PM |
frame gaurds | bonkeye | Enduro Chassis & Body | 6 | 08-28-2011 08:49 AM |
2002 frame; same as a 2005 frame, or close enough? | Trooper Sam | Enduro Chassis & Body | 0 | 06-10-2010 09:18 AM |
Skid plates and Rad Gaurds | 2 strokes 4 life | General Discussions & Announcements | 3 | 08-18-2008 07:47 PM |