|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
98 ec250 converting to WP forks / caliper ??
Hello all !
I'm converting my 98ec250 to a WP USD fork setup. I would like to know if anyone has information as to what caliper I need to match up to the WP forks. I have a 01 CR250 caliper that has the correct bolt pattern, but the center of the caliper hits the fork so that is out.... Do I need to look for a GG caliper, or does anyone know of an interchange? I have the axle and required spacers on order, so the brakes are the only thing stopping me from finishing the swap (pun intended). Thanks for any info! Jim |
#2
|
||||
|
||||
Jim,
I've done this conversion, I am also using a Nissin Caliper, however you need the correct caliper bracket that mounts to fork lugs. It is a GasGas part, and if you call Go.Fasters, they can hook you up! I bought a complete front end off of an 03, 300 with WP forks, so it was a very easy swap. Let me know if you need anymore info. Good Luck
__________________
Rick 99 EC 200 06 RM 250 AMA D36 375X OTHG 375S ***Thanks for the support : Twin Air /O'Neil Racing / Race 100% / Matrix Concepts / ODI / Mika Metals |
#3
|
|||
|
|||
Ok, so I must use the CR250 Nissin caliper I have, PLUS the correct bracket from a 2001+ model GG.
Got it, thanks a million! I would have loved to have the whole front end assembly to work with, but since I traded my buddy for the forks, so I don't have much $$$ in the swap so far besides the labor for a revalve/rebuild. I appreciate the response Rick !! |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2001 EC250 Forks | leejames | Enduro Suspension | 1 | 09-14-2010 03:04 PM |
Converting a Sachs shock to fit a bladder? | Keg | Enduro Suspension | 12 | 06-22-2009 11:17 AM |
Converting 2009 EC300 to Motard | cheekeon | Enduro Chassis & Body | 0 | 04-12-2009 03:04 AM |
SHowa 47mm USD forks on a '04 EC250 (with picts) | jiauka | Enduro Chassis & Body | 4 | 02-27-2009 09:35 AM |
EC250 Forks??? | darren | United Kingdom | 18 | 02-17-2009 02:02 PM |