|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
headlight plastic/rubber strap fix
im guessin im not the only one who has wear on the rubberstrap nub that fixes to headlight pod,and/or a split plastic tab around where the nub attaches?
i removed the rubber strap,then i took a piece of thin/tie wire stiff enough to use as a 'needle' and holding it with pliers,heated the wire to redhot tip.(or 1mm drill),then pushed it vertically(90deg to tab edge) through the rubber nub itself,right where the nub would emerge on the inside of plastic tab, leaving enough wire to tie off. if your plastic tab is intact you will have to pull wire,and thread it through after pushing the nub through tab. then wrap the two ends outwards around the tab and outer rubber,and tie off just firm. it seems fairly robust and cost nothing
__________________
2013 ec200r |
#2
|
||||
|
||||
I used zip ties and little bit of silicone while out on the trail last year, still holding strong.
__________________
'14 EC300 |
#3
|
||||
|
||||
I didnt have enough nub left to fit a zip ty through or would have!
__________________
2013 ec200r |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
rubber kick stand strap | jostby | "Wanted to Buy" & "Want To Trade" | 2 | 11-18-2015 03:57 PM |
Tow strap for 2015 | gasgasman | Enduro Product Announcements | 5 | 09-25-2015 12:55 AM |
headlight mask mounting strap | bluespark | Enduro Chassis & Body | 5 | 06-12-2015 08:48 AM |