GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Intake/Carburetion - 2 stroke

Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 04-14-2013, 08:57 PM
white white is offline
Member
 
Join Date: Mar 2013
Posts: 8
Default 2012 200

can anyone tell me what theyre running for jetting for a 2012 0r 13 200?


Reply With Quote


  #2  
Old 04-15-2013, 05:32 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Default jetting 2012 200xc

White,
Another member turned me on to his spec. which is 45 pilot 6.5 slide stock needle 2nd clip from top and 172 main jet. This seems to work very well for me.
good luck.
Reply With Quote
  #3  
Old 04-15-2013, 08:16 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,996
Default

What was the stock needle? From all of my experience jetting all the bikes I have, the real magic is in the needle. Not surprising as it covers the largest range of throttle openeings.
Reply With Quote
  #4  
Old 04-15-2013, 10:36 PM
white white is offline
Member
 
Join Date: Mar 2013
Posts: 8
Default

I miss needle jets!, thanks john
Reply With Quote
  #5  
Old 04-16-2013, 08:08 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Cool 2012 200xc jetting

Jake,
I'm glad you reviewed the post,as I wanted to get your thoughts on the needle
which is nozh. I'm very happy with the jetting Hamilton has suggested.
However still massive amounts of spooge @ the exhaust. keep in mind I have yet to get the squish corrected. I'm also thinking of trying the cannon silencer.
Good luck w/ the tear down, looks good so far.Almost forgot mixing silkolene @ 32:1 92 oct.pump piss
guessing 1500 feet above sea level.
Reply With Quote
  #6  
Old 04-16-2013, 08:29 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,996
Default

Cheers John,

NOZH is the same taper profile as the N1Ex but half a clip position leaner. I find it interesting that GG is actually using a leaner needle in their 200s than they are in the 300s.

I played with that taper profile in my 300 and the 1st taper was always too rich. I never even bothered with the 250 top end, but I'm not surprised it runs alright in the 200. Generally the smaller bores will require richer jetting. Your spooge could be from the first taper, but more likely its just the fmf spoogecannon q-series silencer, especially considering you said its running well. Thats the most important part of it all.
Reply With Quote
  #7  
Old 04-16-2013, 08:57 AM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Cool 2012 200xc jetting

Thanks Jake,
Hey I've been meaning to ask, I was kicking around the Ausie gg site and ran across a photo of a bloke and his wife? They both had mullit hair doo's.I fell out of my chair laughing. No disrespect if this is there norm. Lol... Do you know the photo I'm speaking about?
Reply With Quote
  #8  
Old 04-18-2013, 11:54 AM
roverhybrids roverhybrids is offline
Senior Member
 
Join Date: Mar 2011
Location: Redding, CA
Posts: 376
Question

Quote:
Originally Posted by Jakobi View Post
...... I find it interesting that GG is actually using a leaner needle in their 200s than they are in the 300s...........
On my 2011 ec200 Six Days it has a #6 slide I don't know what comes in the 2012's.
I've read on here some earlier 200's having a 6.5 slide
__________________
2011 GasGas ec300R
2011 GasGas ec200 Six Days
Reply With Quote
  #9  
Old 04-18-2013, 12:04 PM
john r b's Avatar
john r b john r b is offline
Platinum Level Site Supporter
 
Join Date: Aug 2012
Location: Warrenton,Va
Posts: 957
Default

Quote:
Originally Posted by roverhybrids View Post
On my 2011 ec200 Six Days it has a #6 slide I don't know what comes in the 2012's.
I've read on here some earlier 200's having a 6.5 slide
My 2012 200xc came w/ a #6 slide as well.
Reply With Quote
  #10  
Old 04-18-2013, 07:16 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,996
Default

The 300's and 250's seem to come with a #7 non notched slide. Or a #6.5 notched.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2012 xc 300 modette Enduro Engine - 2 stroke 0 12-16-2012 01:28 PM
2012+ 125?? surfer1100 General Discussions & Announcements 18 09-29-2012 12:11 PM
2012 ISDE Six Days - 2012 Bike Prep Questions Graham General Discussions & Announcements 31 09-21-2012 04:12 PM
2012 450 tm_enduro General Discussions & Announcements 1 11-22-2011 07:35 PM




All times are GMT -5. The time now is 12:53 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org