GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 02-07-2016, 11:32 AM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 209
Default Headlight power issue

My headlight work only on very high rpm,work about 4 seconds,and die. My speedometer have the same issue,I got light only 1-2 seconds and die,but the no problem with info from spedoo.
Water in ignition case can be the problem?


Reply With Quote


  #2  
Old 02-07-2016, 11:54 AM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,375
Default

Yes, but other things can be the problem too. You've got to look for poor connections and corroded wires. If your light bulbs burn out, then the voltage regulator could be bad. You also need to be sure all ground connections are good.
__________________
2011 EC250E
Reply With Quote
  #3  
Old 02-07-2016, 12:05 PM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 209
Default

The bulbe is ok,conections are in place,or seams to be. Yesterday all was good,tomorrow I will check again.
Reply With Quote
  #4  
Old 02-08-2016, 04:36 AM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 209
Default

So after an hour of checking all connections,no problem found. The problem can be only from alternator/ignition place because no electric impulse coming from this yellow cable.
Attached Images
File Type: jpg IMG_20160208_110210.jpg (127.7 KB, 33 views)
Reply With Quote
  #5  
Old 02-08-2016, 11:15 AM
Neil E. Neil E. is offline
Senior Member
 
Join Date: Mar 2007
Location: Gormley, Ontario, Canada
Posts: 1,375
Default

That looks to be the stator output wires in your photo. If there is no AC voltage measuring between the yellow wire and engine/chassis ground, then it is likely the stator is bad.
__________________
2011 EC250E
Reply With Quote
  #6  
Old 02-08-2016, 01:28 PM
adriano.ro adriano.ro is offline
Senior Member
 
Join Date: Feb 2015
Location: Romania
Posts: 209
Default

Yap,that is for shore. But no stress,I find a guy ho can repair it with 30$. For advence the timing ignition,how need to rotate the stator,to the left or to the right? 1.5mm seams to be the good timing measure.
Reply With Quote
  #7  
Old 02-08-2016, 01:57 PM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

rotate the stator opposite direction of flywheel rotation to advance the timing.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ec125 -01 power valve issue? Nicolas89 Enduro Engine - 2 stroke 83 08-06-2014 05:33 AM
clutch issue gasn4christ Enduro Engine - 2 stroke 4 10-13-2013 04:02 PM
Loss of power - suspect power valve Jonny Halls Enduro Engine - 2 stroke 4 01-22-2013 10:56 AM
ec 400 gearbox issue Paul Somerville Enduro Engine 4 stroke (including EFI & Exhaust) 3 09-05-2009 11:17 AM
headlight power-AC or DC? mattmax Enduro Electrical & Wiring 2 03-29-2007 08:48 PM




All times are GMT -5. The time now is 08:13 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org