GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Electrical & Wiring

Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 06-15-2010, 03:03 PM
gregtenerife gregtenerife is offline
Member
 
Join Date: Jan 2010
Location: tenerife, canary islands, spain
Posts: 14
Default ec 250 speedo help

I have just changed the batteries on my ec 250 speedometer/computer (the older round shape one) Now it reads very high speeds about 50 mph when I'm only doing about 30 and the trip meter is also reading higher than it should. Does anyone know how I can adjust or re-calibrate it please? I've spent hours on Google with no results!


Reply With Quote


  #2  
Old 06-16-2010, 12:05 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

If I remember correctly, you take the battery out, then hold down the lower button on the left side and put the battery in. It's some strange combination of finger fumbling like that.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
  #3  
Old 06-17-2010, 12:57 PM
gregtenerife gregtenerife is offline
Member
 
Join Date: Jan 2010
Location: tenerife, canary islands, spain
Posts: 14
Default speedo help

The battery thing is to change from km/h to mph. The manual says "If you get the display to read "a 00" then you are in the rolling radius changing mode. you can "trim" the speed to run fast or slow. It ranges from "a-25" to "a 25". But it doesn't say how to get it to read "a00" I've been pushing these two poxy buttons in every combination for two days!
Reply With Quote
  #4  
Old 06-17-2010, 02:06 PM
roostafish's Avatar
roostafish roostafish is offline
Gold Level Site Supporter
 
Join Date: Jul 2006
Location: Eugene Oregon
Posts: 1,245
Default

Bummer. Man, I don't know. Seems like there should be a separate manual on the speedo included in the new bike package. I don't have anything like that though.
__________________
Mike Sheetz
OMRA #21AA
What will I be riding next? Christini GG 300?
'15 KTM 300 XC-W
'08 EC 250 (Gone to new happy owner)
Gran Prix Cycle
LTR Suspension
RB-Designs
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2007 EC 300 Speedo super_rat Enduro Electrical & Wiring 25 08-23-2019 12:56 PM
07 ec 300 speedo probs !!! pilktm General Discussions & Announcements 3 02-08-2009 01:50 PM
EC 300 speedo ?? oldgoat Enduro Electrical & Wiring 7 08-11-2007 04:29 AM
Speedo Cable?? jonnyweston Enduro Electrical & Wiring 1 09-11-2006 09:23 AM




All times are GMT -5. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org