|
Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
tyre pressure
i am just after what pressures you guys run in your tyres? front and back? cheers
|
#2
|
|||
|
|||
Around 10. M59 front, S12XC rear. 2 more PSI for rocky areas. It's going to vary big time depending on conditions and what tires people are running.
__________________
2018 XC300 |
#3
|
||||
|
||||
I run 4-6 psi depending on the coarse...Oh wait that's the Trials bike...
12-14 front and back. Never spun a tube yet. Makes ya cringe a bit hitting a big rock a higher speeds but I haven't had a front flat for some years either.
__________________
HuskyDude 10 EC300XC 08 TE510 07 TXT 280 77 TY175 |
#4
|
||||
|
||||
i run 7psi front and rear with tubliss..
__________________
07 ec300 was 00 xc200 now a 00 xc300. now parting out. 99 ec300 (now a pile of parts which are for sale) Stainless Cycle - Motorcycle Bolt Kits www.stainlesscycle.com |
#5
|
|||
|
|||
I run 8 in the rear with a mt43 and 10 up front, both with heavyduty tubes. I have a Tubliss waiting for the mt43 to wear out. I'll run less then.
__________________
'14 Beta 300rr '05 GG DE300 '03 GG EC250 '01 XR440 '09 FZ1 |
#6
|
|||
|
|||
So what would you guys recomend with my 2000 ec 250 for enduro racing?
|
#7
|
||||
|
||||
tire pressure is just like suspension settings its adjusted to change how the bike handles that being said start with 12 and adjust up or down as needed for your bike, riding style and conditions.
|
#8
|
|||
|
|||
MT43 with Tubliss @ 6 1/2 in the rear and knobby in front @ 11psi with standard tube.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
EC 300 cylinder pressure | pevs | Enduro Engine - 2 stroke | 33 | 05-30-2023 01:58 PM |
No oil pressure when doing wheelies | Emil123 | Enduro Engine 4 stroke (including EFI & Exhaust) | 14 | 12-26-2014 09:10 PM |
400 FSE Fuel Pressure | Gi_GASGAS | Enduro Engine 4 stroke (including EFI & Exhaust) | 6 | 04-24-2010 02:06 AM |
Minimum tyre pressure | stay_upright | Enduro Chassis & Body | 13 | 07-22-2009 10:47 AM |
How much fluid and pressure and sag? | gasser | Enduro Suspension | 0 | 04-16-2009 02:16 PM |