GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine 4 stroke (including EFI & Exhaust)

Enduro Engine 4 stroke (including EFI & Exhaust) 4 stroke engine, EFI, and exhaust discussion

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-04-2009, 08:21 AM
GMP's Avatar
GMP GMP is offline
Senior Member
Join Date: Jul 2006
Location: Jefferson Twp., NJ
Posts: 7,597

I cannot see how it could improve starting, because it is bypassed and not functioning when the bike first starts. It takes a few seconds to boot before it does its thing. This is because the ECU is applying a heavy start enrichment factor of its own at his point. There is a yellow LED that flashes while this is happening. Once this is complete, it will enrich the idle if the low speed range adjustment is set above zero. I'm sure mine worked this way, but if by chance Dobeck made a design change maybe you should call and find out.
How much clearer do I have to get?

I HAD ONE ON A VROD. IT WORKED THAT WAY. I DIDN'T MAKE THIS UP. Call Dobek or waste your money, I don't care.

The battery voltage being low is possibility.

Do a little research on how EFI systems function, understanding this this will help your troubleshooting immensly.

I'm finnished with this thread.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 06:42 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2009 -