|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
2018 XC 300 charging voltage
What voltage is the battery supposed to charge at while the bike is running?
I just put some dielectric grease in all of my electrical connections, now with the bike running my battery reads 13.12 and climbs very slowly. I thought it should be a higher voltage with the bike running and stator charging the battery? |
#2
|
|||
|
|||
The resting voltage for a lithium battery is ~13 V. Perhaps your battery is already sufficiently charged. My voltage when running at moderate revs is usually 14-14.5 V.
Maybe the grease is reducing electrical contact along the way if a connection is not totally firm.
__________________
2011 EC250E |
#3
|
|||
|
|||
The manual says 14.2v. Saying that my 2018 gp250 dose not charge over 13.5v and reads lower when running if battery charge is down
|
#4
|
||||
|
||||
Try another volt meter.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2018 GP250 not charging | Wuzofoz | Enduro Electrical & Wiring | 16 | 11-11-2018 01:42 AM |
Charging | kiwigasgas | Enduro Electrical & Wiring | 25 | 10-06-2016 03:59 AM |
not charging battery | OLD.IT | Enduro Electrical & Wiring | 2 | 06-21-2015 03:01 AM |
Charging phone on 2011 EC300 | Quigs | Enduro Electrical & Wiring | 9 | 03-07-2015 12:55 AM |
Battery Not Charging | GLantern | Enduro Electrical & Wiring | 6 | 08-25-2013 03:45 PM |