GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > GasGas Enduro Technical Forums > Enduro Chassis & Body

Enduro Chassis & Body Enduro Frame, Plastic, Brakes, Bars, Controls, wheels, tires, sprockets & gearing.


Reply
 
Thread Tools Display Modes
  #1  
Old 12-09-2019, 06:04 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 50
Default restoring a 2000 XC300

Trying to bring a basket case XC300 back to life.
The 10th # in the VIN is 0 so I'm assuming its a 2000.
Please correct me if im wrong.
I need a rear fender preferably one without the tail light.
shift lever and brake lever.
Having a hard time finding anything for this bike.
where can I get this stuff?


Reply With Quote


  #2  
Old 12-09-2019, 06:48 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 631
Default

Halls cycle 12177890107 just got a rear finder think it was $35 shifters you can find on ebay
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #3  
Old 12-09-2019, 07:12 PM
pscook's Avatar
pscook pscook is offline
Platinum Level Site Supporter
 
Join Date: Oct 2011
Location: Shoreline, WA
Posts: 1,164
Default

2000 era XC300's use 1998-ish KX250 bodywork, so a rear fender in lots of varying colors shouldn't be too hard to find. I believe that side panels are same era KX250, the only difference in my memory is that the XC300 has an air filter access panel on the left side and the KX doesn't have the little access panel.
__________________
Phil
(New bike pending...)
Reply With Quote
  #4  
Old 12-10-2019, 10:30 AM
slocalspode's Avatar
slocalspode slocalspode is offline
Senior Member
 
Join Date: Mar 2007
Location: Southern Kalifornia
Posts: 411
Default

What part of the country (World) are you in?
I likely have some used plastics, but, finding a box and shipping
might be more of a hassle than the parts are worth.



Quote:
Originally Posted by Adam500 View Post
Trying to bring a basket case XC300 back to life.
The 10th # in the VIN is 0 so I'm assuming its a 2000.
Please correct me if im wrong.
I need a rear fender preferably one without the tail light.
shift lever and brake lever.
Having a hard time finding anything for this bike.
where can I get this stuff?
Attached Images
File Type: jpg Plastics1.jpg (85.2 KB, 14 views)
Reply With Quote
  #5  
Old 12-10-2019, 05:52 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 50
Default

Thanks for all the info guys.
Good to know about the KX part interchange. Can only find black and green KX fenders. I'd really like a blue one.
Im located in upstate NY
Reply With Quote
  #6  
Old 12-10-2019, 07:51 PM
cbutler's Avatar
cbutler cbutler is offline
Senior Member
 
Join Date: Mar 2009
Location: Hot Springs AR
Posts: 631
Default

Call Halls......m
__________________

02 EC 200
03 MC 250
88 VT 800
01 TXT 280
Reply With Quote
  #7  
Old 12-11-2019, 11:52 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

Quote:
Originally Posted by pscook View Post
the only difference in my memory is that the XC300 has an air filter access panel on the left side and the KX doesn't have the little access panel.
The access panel was added in '01. All KX250 plastic except radiator shrouds which are GG only.
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #8  
Old 12-11-2019, 06:02 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 50
Default

mine has the access panel.
Do I have the year correct?
Again the 10th # in the VIN is zero.
Is that how ya tell?
Reply With Quote
  #9  
Old 12-13-2019, 11:41 AM
jostby jostby is offline
Senior Member
 
Join Date: Oct 2006
Location: Spokane, WA
Posts: 748
Default

2000 model year should be correct but if someone updated the plastics to a newer year to get rid of the "pink" red '00 plastics (like I did to mine) then the airbox got changed also, that's probably why you have the side air filter access panel. Check the sticky threads in the general discussion forum, lots of info there. Also the main page has some "parts crossover" tab with even more info but you don't seem to be able to get there from here. Here's the link http://gasgasrider.org
__________________
jeff

'00 XC250 (mine)
LTS front and rear suspension, power valve cover, carb jet kit and rear chain glide, RB Designs head mod, BRP tall triple clamp, backyard foot-peg lowering conversion.
'04 EC250 (the kids)
(he can do his own mods haha!)
Reply With Quote
  #10  
Old 12-18-2019, 06:56 PM
Adam500 Adam500 is offline
Member
 
Join Date: Oct 2015
Posts: 50
Default

still cant find cross over parts for shift and brake lever and hand levers.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Testing a '14 XC300 ferderer Pictures & Videos 25 04-22-2014 07:06 PM
2000 xc300 Jeremyxc300 Used Bikes 1 03-17-2014 06:37 PM
2013 xc300 E lordofhurley General Discussions & Announcements 1 05-06-2013 07:18 PM




All times are GMT -5. The time now is 04:42 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org