|
General Discussions & Announcements General Announcements, General Questions, e.g. What bike do I buy?, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hex cap screw m7x30mm?
Where can i find these that are not $6 each? 🤦*♂️
|
#2
|
||||
|
||||
Handle bar clamp?
|
#3
|
||||
|
||||
I just bought some zink plated 8mm x 1.25 x 35mm for $0.71 each.
Bolt Depot.com |
#4
|
||||
|
||||
Any good hardware store should have them.
Like the kind of store your grandfather probably went to...
__________________
2018 GasGas EnduroGP250 2018 GasGas TXT GP300 1994 Honda CR500 (Ice Racer) |
#5
|
||||
|
||||
Ahh the Europeans and their quaint range of fasteners. Always wondered why there were so many sockets in a set.
My Beta had exhaust pipe held on with M7s which had 11mm heads and we're so close to the pipe you had to use an open ender and it took about 10 minutes to do them up. Still. If it weren't for the French we'd all still be using ridiculous sizes with an array of silly fractions and treads per inch. That and Michelin tyres. OK two things are enough.
__________________
'07 EC300 GG '14 TXT250 GG '? 496 CPI Cheetah RZ/RGV hybrid '22 765 Street Triple RS '21 XTrainer '69 Stinger T125 Suzuki '23 TRS 250RR (it's a Trials thing) |
#6
|
||||
|
||||
I looked for longer than stock 7mm cap screw for several hours and never found them. I needed them to try to grab the last few threads in the clamp after the close threads galled, bound up and stripped. (FYI- it is a great idea to put anti-seize on these threads so they don't gall.) I found longer 7mm hex head screws and added a 1/4 in steel tube spacer so the hex head was outside the recessed hole and the spacer was able to fit inside the recessed hole and put pressure on the flat contact point.
|
#7
|
|||
|
|||
M7's are an odd size. I only found them with hex heads as you did.
|
#8
|
|||
|
|||
Just for you Americans M7 is a very unusual size here in Europe. I don’t know why gasgas is using it. In my opinion just to make after market business
Gesendet von iPhone mit Tapatalk
__________________
4 strokes are only good for power generators |
#9
|
|||
|
|||
No it’s the 10 bolts for the triple clamp. I have 8 good ones , one that’s stripped and one that’s broke. Nothing locally has anything close. I can find them in PA , but $5 and some change is pretty expensive for me .
|
#10
|
||||
|
||||
Honestly, when you consider shipping, you should just buy the two local bolts for 5 bucks each.
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Idle screw? | hamilton | Enduro Intake/Carburetion - 2 stroke | 10 | 12-08-2014 02:01 PM |
New idle screw | bkrjohn | Enduro Intake/Carburetion - 2 stroke | 1 | 07-29-2012 03:00 PM |
Zip Ty extended air screw | Bailey28 | Enduro Product Reviews | 3 | 06-03-2011 07:05 PM |
200 with screw in the crank???? | ramcclure200 | Enduro Engine - 2 stroke | 3 | 05-03-2007 11:42 PM |
Anyone else ever broken an air screw? | lukachuki | Enduro Intake/Carburetion - 2 stroke | 16 | 03-12-2007 07:43 AM |