Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2018, 11:02 AM
kdxkid kdxkid is offline
Member
 
Join Date: Mar 2014
Posts: 59
Default Rekluse 3.0 EXP setup (2011 EC 300)

Hello,

Any advice on what spring combo to run in the Core EXP 3.0?

Also, any advice on running CR frictions? They are a bit thicker (around 3 mm) - I am not sure if I can use 7 of these, or if that will be too thick.


Reply With Quote


  #2  
Old 08-09-2018, 12:40 PM
kdxkid kdxkid is offline
Member
 
Join Date: Mar 2014
Posts: 59
Default

Note - this is a core 3.0 EXP complete kit
Reply With Quote
  #3  
Old 08-09-2018, 10:02 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default CR Clutch Pack Measurements

Here is my thread on this with photos and detailed specifics. Go to post #15 for details, then posts #42,#46 and #47.I have never had a problem with this setup and I am still using it now.


http://www.gasgasrider.org/forum/sho...ch+pack&page=2
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar

Last edited by Moto7man; 08-09-2018 at 10:06 PM. Reason: Add info
Reply With Quote
  #4  
Old 08-10-2018, 10:11 AM
kdxkid kdxkid is offline
Member
 
Join Date: Mar 2014
Posts: 59
Default

Quote:
Originally Posted by Moto7man View Post
Here is my thread on this with photos and detailed specifics. Go to post #15 for details, then posts #42,#46 and #47.I have never had a problem with this setup and I am still using it now.


http://www.gasgasrider.org/forum/sho...ch+pack&page=2
I just read that (and the link regarding the honda steels / fibers). Both don't deal with the CORE EXP 3.0. Can I ask why you switched over to the honda steels / fibers? Also, why did you go out and buy the rekluse basket without first trying your GG basket w/ the rekluse core EXP?

What I am really after is what springs are people using the their CORE EXP 3.0.
Reply With Quote
  #5  
Old 08-10-2018, 10:18 AM
Darkside Darkside is offline
Senior Member
 
Join Date: Jan 2011
Location: SF Bay Area, CA
Posts: 134
Default

I'm using 3 red and 3 blue in my beta 300. I also have a core exp 3. no problems over 100 hours now
__________________
2006 GasGas EC300 2011 KTM 300XC
Reply With Quote
  #6  
Old 08-10-2018, 10:35 AM
kdxkid kdxkid is offline
Member
 
Join Date: Mar 2014
Posts: 59
Default

Quote:
Originally Posted by Darkside View Post
I'm using 3 red and 3 blue in my beta 300. I also have a core exp 3. no problems over 100 hours now
cheers - I will give that a go to start
Reply With Quote
  #7  
Old 08-10-2018, 04:53 PM
Anders's Avatar
Anders Anders is offline
Gold Level Site Supporter
 
Join Date: Nov 2009
Location: Kongsberg, Norway
Posts: 1,113
Default

Quote:
Originally Posted by kdxkid View Post
I just read that (and the link regarding the honda steels / fibers). Both don't deal with the CORE EXP 3.0. Can I ask why you switched over to the honda steels / fibers? Also, why did you go out and buy the rekluse basket without first trying your GG basket w/ the rekluse core EXP?

What I am really after is what springs are people using the their CORE EXP 3.0.
I use the ones that came pre-installed with the EXP 3.0 kit. Suits me fine on my 200
__________________
Anders

"So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie)

2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper
2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper
1998 Bimota Supermono
1986 Duc Mille S2
1975 Guzzi sidecar hack
1961 Morini Corsaro 125
etc
Reply With Quote
  #8  
Old 08-10-2018, 08:54 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 2,537
Default

Quote:
Originally Posted by Anders View Post
I use the ones that came pre-installed with the EXP 3.0 kit. Suits me fine on my 200
Me too. The Rekluse basket is probably not necessary but it is much stronger. There is better availability of Honda clutch plates and the price is cheaper.
__________________
2011 GG EC 300E, 1994 CR 250R, 1984 RM 250 E, 2022 Ranger 300

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black

"I think best when I have a wrench in my hands." Soichiro Honda

"Dreams are messages from the deep."
-Unknown Sardaukar
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Best setup for ec300 2011 in hard enduro drn51 Enduro Engine - 2 stroke 15 12-28-2011 12:08 AM
rekluse core exp setup? blanc General Discussions & Announcements 2 03-14-2011 05:05 AM
rekluse setup questions..and jetting! stainlesscycle Enduro Engine - 2 stroke 8 09-21-2009 05:57 PM




All times are GMT -5. The time now is 12:37 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org