|
Enduro Electrical & Wiring Lighting, Ignition, Wiring, Plugs, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Lighting
Hey all, just a quick question. I picked up a used 2012 ec250r. The prior owner removed all the lighting. I'd like it back. Can someone confirm the attached pic is the voltage regulator? And that it needs to be connected to the yellow power wire coming from the stator and to the ground? Right now I have the yellow from the stator connected to the yellow from the switch and the yellow/green grounded. Everything lights with the switch but i'm afraid as soon as I rip the throttle it'll blow the light. Thanks guys. dave
20151221_070349.jpg |
#2
|
||||
|
||||
Quote:
Just to be 100% certain, you could of course measure the voltage using a multimeter (on AC) before connecting the lights.
__________________
Anders "So you know, that you're over the hill when your mind makes a promise that your body can't fill" (Little Feat: Old Folks Boogie) 2015 EC200 Racing: TE bars, Rekluse Core Exp 3.0, 38mm Lectron & Ohlins S3 steering damper 2006 EC200: 2011 plastics, Rekluse Z-Start, revalved KYB forks & Scotts steering damper 1998 Bimota Supermono 1986 Duc Mille S2 1975 Guzzi sidecar hack 1961 Morini Corsaro 125 etc |
#3
|
|||
|
|||
Thank you sir. Appreciate it. Happy holidays!
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
need more power for lighting | Jeremyxc300 | Enduro Electrical & Wiring | 6 | 03-21-2014 03:14 PM |
lighting up my 01..... | jhendr3702 | Enduro Electrical & Wiring | 10 | 06-10-2013 09:19 PM |
Lighting not working | Wilksiee | Enduro Electrical & Wiring | 17 | 03-20-2012 12:34 PM |
lighting problem | craigyboy | Enduro Electrical & Wiring | 1 | 12-27-2011 08:57 PM |
Lighting Up An 08 | moto9 | Enduro Electrical & Wiring | 4 | 09-24-2010 10:15 PM |