Rieju & GasGas Legacy Riders Club Forum  

Go Back   Rieju & GasGas Legacy Riders Club Forum > GasGas Enduro Technical Forums > Enduro Engine - 2 stroke

Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc.


Reply
 
Thread Tools Display Modes
  #1  
Old 05-24-2008, 10:04 AM
stay_upright's Avatar
stay_upright stay_upright is offline
Senior Member
 
Join Date: Jan 2008
Location: Coventry UK
Posts: 460
Default Does your clutch drag?

Just wondering of the GG's out there if most have a dragging clutch?

I.e. with the engine idling engaging gear will make it stall or slow the engine speed noticeably - or in gear with the clutch pulled and pushing the bike there is noticeable drag from the back wheel/chain

If you have none of these symptons which gear box oil do you use and are you still on the original clutch?
__________________
'05 Gas Gas 300
'97 Aprilia Pegaso 650
'99 KTM 200
'95 ish XR630 (died many times in Oz)
Reply With Quote
  #2  
Old 05-24-2008, 04:07 PM
fury1's Avatar
fury1 fury1 is offline
Senior Member
 
Join Date: Jul 2006
Posts: 491
Default

I dont have a problem,06 ec300 stock clutch,shell rotella 15w40 oil,starts easily in gear as well
Reply With Quote
  #3  
Old 05-25-2008, 08:26 AM
2 strokes 4 life's Avatar
2 strokes 4 life 2 strokes 4 life is offline
Senior Member
 
Join Date: Apr 2008
Location: Grande Prairie, Alberta, CND
Posts: 678
Default

I dont have any issues on my 2002 GG EC250 with stock clutch plates and springs. I run Amsoil 0W-40 4 stroke oil. I ride in +30 deg C to +5 deg C.
__________________
2002 Gasgas EC250 (gone not forgotten)
2012 Ktm 300xc
2001 Gasgas EC300
Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!!
Reply With Quote
  #4  
Old 05-25-2008, 08:41 AM
iancp5's Avatar
iancp5 iancp5 is offline
Senior Member
 
Join Date: Aug 2006
Location: U.K.
Posts: 829
Default

Mine doesn't drag on either Putoline Light Gear Oil or Halfords Dexron III ATF. I also succesfully used a Motorex light gear oil, can't remember the name though.
Reply With Quote
  #5  
Old 05-25-2008, 09:32 AM
Eric K Eric K is offline
Senior Member
 
Join Date: Jul 2006
Posts: 546
Default

First off, bleed your clutch slave cylinder.

If that doesn't fix it, then try AmsOil Formula 4 stroke 0W-40 oil.

That cured my '01 XC300 clutch drag.

The '06 EC300 clutch seems to be more tolerant of different oils.
__________________
Eric K
'06 GasGas EC300
'01 GasGas XC300
Reply With Quote
  #6  
Old 05-25-2008, 06:20 PM
mountain thumper's Avatar
mountain thumper mountain thumper is offline
Senior Member
 
Join Date: Mar 2008
Location: missoula mt
Posts: 333
Default

mine drags the same way. adjusted the lever all the way. but it still slows in gear with lever in, and moving (off) with level pulled.
how do you bleed it? is it a reverse bleed?
ps sorry if some of my posts have misspells, i switched back to dvorak keyboard
__________________
Le Crutan
98 ec250 sixdays, doma, eline pipe guard, zokes shivers from a cr250,fredette racing chain slider, protaper withbarkbusters (SOLD)

FOR THE SECOND TIME 07 EC300 polisport headlight, acerbis taillight ltr pv cover and case saver,trailtech endurance,120z fww, g2 throttle,xr chain puck:
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yes my Clutch does drag. (F5) Enduro Engine - 2 stroke 42 04-09-2019 12:11 AM
Clutch Drag? Gas Huffer Enduro Engine - 2 stroke 5 12-11-2007 05:02 AM
05' EC300 Clutch Drag gasIdaho Enduro Engine - 2 stroke 18 09-09-2006 02:53 PM




All times are GMT -5. The time now is 12:52 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org