GasGas Riders Club Forum  

Go Back   GasGas Riders Club Forum > Other Bikes... > All Other Bikes...

All Other Bikes... KTM, Husky, VOR, Husaberg & Hondayamazuki...


Reply
 
Thread Tools Display Modes
  #41  
Old 08-31-2017, 11:13 PM
Moto7man Moto7man is offline
Member
 
Join Date: Aug 2011
Location: Murfreesboro,Tennessee
Posts: 1,841
Default

Quote:
Originally Posted by Jakobi View Post
I pulled the silencer apart. Removed a heap of steel wool that was in there. It wasn't blocking the inner pipe/causing any real obstructions though. Packing didn't seem over tight or soaked in spooge so I put it back together. Haven't tested yet.

On assembly ensured that there was good contact to the frame on engine mounts and on the coil. Also had the coil removed recently to double check resistance. At the same time clipped both ends of the plug cable. Specced up the same, but also haven't tested since.

Currently have the reeds out, so plan was to install reeds again with the replacement intake boot that I had ordered during the build up. Then see if it's mysteriously fixed itself.
Could one of reeds have a crack or be out of spec to cause the flutter?


__________________
2011 GG EC 300E and 1994 CR 250R

"If you stop eating donuts you will live 3 years longer. It's just 3 more years that you want a donut."
―Comedian Lewis Black
Reply With Quote


  #42  
Old 09-01-2017, 05:24 AM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,250
Default

Quote:
Originally Posted by Moto7man View Post
Could one of reeds have a crack or be out of spec to cause the flutter?
That's what I was thinking when I pulled them. I'll give them another close look over, but initial report was that they looked fine. Well sealed, no fraying of the corners.
Reply With Quote
  #43  
Old 09-01-2017, 07:09 AM
hamilton's Avatar
hamilton hamilton is offline
Gold Level Site Supporter
 
Join Date: Nov 2012
Location: Elkton Md
Posts: 408
Default

Take a look at the power valves also, some were cut wrong in 09 and didn't match/partially blocked transfer ports.
__________________
15 GASGAS EC 250
12 GASGAS XC 200
12 GASGAS XC 250
Reply With Quote
  #44  
Old 09-01-2017, 04:30 PM
Jakobi's Avatar
Jakobi Jakobi is offline
Super Moderator
 
Join Date: Oct 2010
Location: Australia
Posts: 7,250
Default

Have seen pictures of that.

Was hoping to not have to drop the coolant and pull the jug just yet.

Will keep you all updated.
Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2009 Husky 300 rear wheel crossover? sam Enduro Chassis & Body 0 01-15-2015 06:34 PM
looking for gasser husky tm 250 supet clean to trade up or down my 2013 husky 144 fletchman45 "Wanted to Buy" & "Want To Trade" 0 03-14-2014 05:11 PM
2007 Honda CR125 GMP All Other Bikes... 20 02-28-2013 04:01 PM
2008 Husqvarna CR125 MattR All Other Bikes... 17 04-27-2010 03:54 AM
In Theory; GG MC125 pipe on a CR125 Bearman Enduro Engine - 2 stroke 0 04-10-2008 02:43 AM




All times are GMT -5. The time now is 02:27 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright 2009 - GasGasRider.org