|
Enduro Intake/Carburetion - 2 stroke Jetting, Reeds, Air Filters, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Need help jetting an 06 EC 250
Can you recommend a setup for riding in the Southern California Desert.
2500-4,000 elevation, temp 70-90 degrees, 92 octane pump gas, Amsoil Interceptor 50:1, FMF Turbine Core 2 Spark Arrestor, stock pipe, trail riding only. Plan to get the LTR Jet Kit Any help would be appreciated. |
#2
|
||||
|
||||
Have you search the site yet? There is a jetting post with different settings and recommendations.
Do you know what you are running now? I would start there.
__________________
2004 GasGas DE250 |
#3
|
||||
|
||||
In my 02 running the same altitude you could start with a 175Main and then move to a 172 mostlikely. A 42 pilot and needle at position #2 from top should be about right.
__________________
2002 Gasgas EC250 (gone not forgotten) 2012 Ktm 300xc 2001 Gasgas EC300 Lifes journey is not to arrive safely at the grave in a well preserved body, But rather to skid in sideways totally worn out shouting holy cow what a ride !!!! |
#4
|
|||
|
|||
That's what I run on my '05 EC250 here in Phoenix (2000 MSL). It worked well at this weekend's race (3500 MSL).
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
where to go from here. jetting q. | dank | Enduro Intake/Carburetion - 2 stroke | 105 | 04-11-2011 04:25 PM |
LTR or JD Jetting Kit | Elvis74 | Enduro Intake/Carburetion - 2 stroke | 7 | 04-08-2010 02:49 PM |
04 ec 300 Jetting | lordfeyr | Enduro Intake/Carburetion - 2 stroke | 12 | 01-26-2010 03:16 AM |
jetting help for 05 300 please... | mackmack | Enduro Intake/Carburetion - 2 stroke | 5 | 09-03-2007 05:10 PM |
06 300 jetting | fury1 | Enduro Intake/Carburetion - 2 stroke | 1 | 07-31-2007 06:37 AM |