|
Enduro Engine - 2 stroke Cylinder, Piston, Tranny, Bearings, Clutch, Pipes & Silencers, etc. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
changing the engine characteristics
Is it possible to make the 300 gasser closer to an mx style engine feel? I like the power and ability to lug but I currently find myself wanting WAY more mid and top end. I occasionally hit the mx track and ride mostly at a faster pace.
What if anything needs to be done? Is it sensible? p.s. Im watching supercross which has more than likely has promoted this post lol
__________________
2013 XC300-E Racing. All stock |
#2
|
|||
|
|||
Try finding an mc or 2k1 ignition and port it
__________________
2004 ec 300 |
#3
|
|||
|
|||
whats an mc or 2k1 ignition? is one better than the other? where can I find such parts?
__________________
2013 XC300-E Racing. All stock |
#4
|
||||
|
||||
Think about a motocross bike running a flywheel weight and how that smooths out the delivery. A stock enduro bike running a big lighting coil/stator is like a big flywheel weight. Go to a smaller one and the bike will spool up quicker.
Can shift the power around a bit too through port timing/porting mods as well as the PV. |
#5
|
|||
|
|||
Mc is the motocross version 250cc gasgas bike and some refer to ignitions as
2k1 = motocross or mc igntion ( light flywheel no lighting capabillity) 2k2 = offroad or de dealer edition ( more aggressive offroad ignition with low output lighting capabillity) 2k3 = offroad or ec ignition (heavy flywheel high light output) gives same effect as a flywheel weight would, Some ktm ignitions cross over if you look at them closley
__________________
2004 ec 300 |
#6
|
|||
|
|||
so to keep the lights I can't really switch to a light weight flywheel set up? I would prefer to keep the lights.
__________________
2013 XC300-E Racing. All stock |
#7
|
|||
|
|||
You gotta weigh both options and get what you want ya kno? Porting sounds like best option and get carb modded
__________________
2004 ec 300 |
#8
|
||||
|
||||
Some of the 300's came with a 36mm carb. If you don't have a 38mm you need one.
__________________
Newest Spanish Girlfriend: 2011 300 Six Days My Daughter is a U.S. Marine |
#9
|
||||
|
||||
Some have also seen top end gains by changing out the Q silencer. Raising the ports and having the head setup will improve things as well.
|
#10
|
|||
|
|||
Is raising the ports and the RB designs head mod the same thing?
__________________
2013 XC300-E Racing. All stock |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Changing Oil | Henningway | Enduro Engine 4 stroke (including EFI & Exhaust) | 0 | 05-01-2013 04:23 AM |
changing gears | glassman581 | Enduro Engine - 2 stroke | 0 | 03-20-2011 05:10 PM |
Changing to Gas Gas? Need Insight... | Bulldog | General Discussions & Announcements | 10 | 11-05-2010 08:04 AM |
what should i be thinking about changing.... | dank | Enduro Intake/Carburetion - 2 stroke | 4 | 06-21-2010 03:41 PM |
Changing my 400FSE to SM | smnl4l | General Discussions & Announcements | 0 | 11-28-2007 11:46 PM |